Panasonic AK-HC1500G operating instructions Detail OFF, on, Knee Aperture OFF, on

Page 28

Setting of menu items

MAINTENANCE menu

[6]DETAIL

�� DETAIL(1/2) ��

 

DETAIL

:ON

TOTAL DTL LEVEL

:+00

H DTL LEVEL

:11

CRISP

:02

LEVEL DEPENDENT

:2

PEAK FREQUENCY

:10

KNEE APERTURE

:ON

KNEE APE LEVEL

:3

 

 

DETAIL [OFF, ON]

For turning all the detail functions ON or OFF.

TOTAL DTL LEVEL [–31 to +31]

For setting the H DTL and V DTL levels.

H DTL LEVEL [0 to 63]

For setting the H DTL level.

CRISP [0 to 31]

For setting the noise elimination level of the detail signals.

LEVEL DEPENDENT [0 to 15]

For removing the detail in the dark areas.

PEAK FREQUENCY [00 to 31]

For setting the H DTL peak frequency.

KNEE APERTURE [OFF, ON]

For turning the emphasizing of the outlines for the high-brightness areas ON or OFF.

KNEE APE LEVEL [0 to 5]

For adjusting the knee aperture level.

- 27 (E) -

Image 28
Contents AK-HC1500G Multi Purpose CameraEnglish Version FCC NoteEnglish Important Safety Instructions For business users in the European Union Contents AccessoriesCharacteristics IntroductionPrecautions for use  Cooling fanFront view Bottom view Rear viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT How to set the lens Iris control cable to Iris connectorHow to set up the system Configuration example 1 Connection of camera controllerConfiguration example 2 High-Speed P/T system Operation procedure Adjust the white balanceAdjust the black balance Start shootingHow to adjust Flange back adjustment for zoom lensLens iris gain volume adjustment Auto iris power zoom lensWhite balance adjustment Color temperature and white balance adjustment referenceBlack balance adjustment Gen-lock adjustmentSetting of menu items How to display the menus Using AK-HRP150G camera controller TOP menu Maintenance menu Black ShadingDetection READY, Active Correctdig OFF, onPEDESTAL, Gamma GammaGamma OFF, on Black Gamma OFF, onDRS OFF, on Cine Gamma Select Video REC, Film RECFlare 000 to FlareFlare OFF, on KNEE, White Clip Knee Point80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC Knee Point -25.00% to +25.00%Knee Level 100% to 109% Knee Point 80.00% to 107.00%White Clip LVL 90% to 109% B Gain Knee OFF, MANUAL, AutoWhite Clip OFF, on High Color OFF, onDetail OFF, on DetailKnee Aperture OFF, on Slim Detail OFF, on Detail SourceSkin Tone DTL OFF, on Skin Tone DetailSkin GET OFF, on Iris Mode LENS, CAM GAIN, Auto IrisIris Level 0 to Iris PEAK/AVE 0 toMode S.GAIN1, S.GAIN2, S.GAIN3 Super Gain35 to 0.75 DRS OFF -10 to +10 DRS on Peak Frequency 0 toPED Offset -200 to +200 Frame Rate Range 60-6 Frame ModeFrame Rate 60 to Matrix Matrix Table A, BColor Correction  Setting menu ModeGain Select LOW, MID, HIGH, S.GAIN1 toMatrix Table OFF, A, B Color Correction OFF, onDigital Extender OFF, on BAR SELFormat Status OFF, onAWB Active AWB OKABB OK OUT Range RGBMenu on BAR OFF, on FAN OFF, AUTO, onShutter Speed ShutterSynchro Scan GEN-LOCK PIX DefectGEN-LOCK Input BNC, Dsub Auto DetectionProtocol Protocol 1 to Camera ID menu Mode LOAD/STORE  File Operation menuLOAD/STORE from ExecutePreset Reset Time Code menu Menu list 47 E 48 E Appearance Unit inch mmSpecifications Input/output signalAppendix Control cable for information camera