Axis Communications Q6034 user manual Control Queue, Controls

Page 31

AXIS Q6034 PTZ Dome Network Camera

PTZ (Pan Tilt Zoom)

When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any direction. This is useful then the view is zoomed in on an object.

See the online help for more information.

Controls

Panel Shortcut Command Buttons can be configured to provide direct access to commands issued via the VAPIX® Application Programming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page through the Ctrl panel button, see page 11.

Deselect the options under Enable/Disable controls to disable the pan, tilt, zoom, focus and iris controls.

Note

Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement.

Control Queue

The administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.

A user who belongs to a group (see Users, on page 41) with a higher PTZ priority can go before other users in the queue and take control of the product. The order of priority is as follows:

1.Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will be removed from the queue 60 seconds after the last PTZ control command.

2.Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Events, on page 35). The event will immediately be placed first in the queue except when an administrator is in control.

3.Operator — Same as administrator but with lower priority

4.Guard Tour — A guard tour (see page 29) has PTZ control for an indefinite period of time. It may be overridden by an operator, event or administrator. The guard tour will resume when higher priority groups leave the queue.

5.Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed on to the next viewer in queue.

Note

•The administrator can enable and disable PTZ controls for selected users.

•To identify different users in the viewer group, cookies must be enabled on the client.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Axis Q6034 PTZ Dome Network Camera Intellectual Property Rights SafetyAbout this Document LiabilityLearn More Axis Q6034 PTZ Dome Network Camera Table of ContentsSymptoms, Possible Causes and Remedial Actions For technical specifications, see ConnectorsHardware Overview Hardware OverviewMidspan LED Indicators LED IndicatorsColor Indication Start a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserClick Create self-signed certificate Access from the InternetSet the Root Password Network TCP/IP AdvancedControls on the Live View Live ViewAxis Media Control viewer toolbar AMC Audio Controls PTZ ControlsAxis Q6034 PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Pixel Counter Video and AudioVideo and Audio Video Stream264 Click Save to apply the new settingsStream Profiles ImageWhite Balance Camera SettingsExposure Settings Image AppearanceGo to Video & Audio Video Stream and select the Image tab Image SettingsOverlay Overlay ImageAudio Input Audio SettingsPrivacy Mask Audio ModesAudio Output Audio ClipsG711 G726 Axis Q6034 PTZ Dome Network Camera Live View Config Default Viewer for BrowsersLive View Config Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis Q6034 PTZ Dome Network Camera Autotracking Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt Zoom Exclude Areas Configuration Max Limits Guard Tour GatekeeperLimits Osdi ZonesAdvanced Tour RecordingControl Queue Operator Same as administrator but with lower priorityControls Motion Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Audio DetectionApplications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules PTZ ControlGo to Events Recipients and click Add RecipientsSchedules Recipient Use with actionGo to Events Recurrences and click Add RecurrencesContinuous Recording RecordingsRecordings Recording ListAxis Q6034 PTZ Dome Network Camera Users System OptionsSystem Options SecurityIeee Date & TimeAudio Support IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage Click Network Share Ports & DevicesNetwork Share PortsSupport MaintenancePlain Config Reset to Factory Default SettingsScripting File Upload192.168.0.90 Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyOverlay image is not displayed Video and image problems, generalSetup Video & Audio Camera Settings No images displayed on webMotion Detection triggers unexpectedly Problems uploading filesSettings Storage and disk management problemsTechnical Specifications Technical SpecificationsConnectors Installation aidMaintenance PowerMulti-Connector Cable sold separately With the load, for protection against voltage transients Function Pin SpecificationsTo +40 V DC Max voltage = +40 V DCDC power input Connection diagramPerformance Considerations Axis Q6034 PTZ Dome Network Camera M1.6
Top Page Image Contents