Axis Communications Q6034 user manual Recordings, Recording List, Continuous Recording

Page 39

AXIS Q6034 PTZ Dome Network Camera

Recordings

Recordings

The Axis product can be conﬁgured to record video continuously or according to an action rule:

•To start a continuous recording, see page 39.

•To set up action rules, see page 36.

•To access recordings, see Recording List, on page 39.

•To conﬁgure camera controlled storage, see Storage, on page 47.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the ﬁlter to narrow the list of recordings. Enter the desired ﬁlter criteria and click Filter. Some ﬁlters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded ﬁle is a zip ﬁle containing a minimum of three ﬁles, of which the Matroska (mkv) ﬁles are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be conﬁgured to continuously save video to a storage device. See Storage, on page 47 for more information about storage devices. To prevent the disk from becoming full, it is recommended to conﬁgure the disk to automatically remove old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select type of storage device from the Disk list.

4.Select a Stream proﬁle to use for continuous recordings.

5.Click Save to save and start the recording.

39

Image 39

Contents Axis Q6034 PTZ Dome Network Camera Intellectual Property Rights SafetyAbout this Document LiabilityLearn More Axis Q6034 PTZ Dome Network Camera Table of ContentsSymptoms, Possible Causes and Remedial Actions For technical speciﬁcations, see ConnectorsHardware Overview Hardware OverviewLED Indicators Midspan LED IndicatorsColor Indication Start a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserClick Create self-signed certiﬁcate Access from the InternetSet the Root Password Network TCP/IP AdvancedLive View Controls on the Live ViewAxis Media Control viewer toolbar AMC Audio Controls PTZ ControlsAxis Q6034 PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Pixel Counter Video and AudioVideo and Audio Video Stream264 Click Save to apply the new settingsStream Proﬁles ImageWhite Balance Camera SettingsExposure Settings Image AppearanceGo to Video & Audio Video Stream and select the Image tab Image SettingsOverlay Overlay ImageAudio Input Audio SettingsPrivacy Mask Audio ModesAudio Clips Audio OutputG711 G726 Axis Q6034 PTZ Dome Network Camera Default Viewer for Browsers Live View ConﬁgLive View Conﬁg Output Buttons Viewer SettingsGo to Setup Live View Conﬁg User Deﬁned LinksAxis Q6034 PTZ Dome Network Camera Autotracking Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomConﬁguration Exclude AreasMax Limits Guard Tour GatekeeperLimits Osdi ZonesAdvanced Tour RecordingOperator Same as administrator but with lower priority Control QueueControls Motion Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Audio DetectionApplications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules PTZ ControlGo to Events Recipients and click Add RecipientsSchedules Recipient Use with actionGo to Events Recurrences and click Add RecurrencesContinuous Recording RecordingsRecordings Recording ListAxis Q6034 PTZ Dome Network Camera Users System OptionsSystem Options SecurityDate & Time IeeeAudio Support IPv6 Address Conﬁguration Basic TCP/IP SettingsNetwork IPv4 Address ConﬁgurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage Click Network Share Ports & DevicesNetwork Share PortsSupport MaintenancePlain Conﬁg Reset to Factory Default SettingsScripting File Upload192.168.0.90 Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyOverlay image is not displayed Video and image problems, generalSetup Video & Audio Camera Settings No images displayed on webMotion Detection triggers unexpectedly Problems uploading ﬁlesSettings Storage and disk management problemsTechnical Speciﬁcations Technical SpeciﬁcationsConnectors Installation aidMaintenance PowerMulti-Connector Cable sold separately With the load, for protection against voltage transients Function Pin SpeciﬁcationsTo +40 V DC Max voltage = +40 V DCConnection diagram DC power inputPerformance Considerations Axis Q6034 PTZ Dome Network Camera M1.6