Axis Communications Q6034 user manual Recipients, Schedules, Recipient Use with action

Page 37

AXIS Q6034 PTZ Dome Network Camera

Events

To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.

The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period.

For more information, see the online help .

Recipients

Recipients receive media ﬁles and notiﬁcation messages. The following recipients are available:

Recipient	Use with action

Email	Send Images
	Send Notiﬁcation

FTP	Send Images

HTTP	Send Images
	Send Notiﬁcation

Network Share	Send Images

TCP	Send Notiﬁcation

Note

A network share can also be used as a storage device for recorded video. Go to System Options > Storage to conﬁgure a network share before setting up a continuous recording or an action rule to record video. See Storage, on page 47 for more information about storage devices.

To add a recipient:

1.Go to Events > Recipients and click Add.

2.Enter a descriptive name.

3.Select a recipient Type.

4.Enter the information needed for the recipient type.

5.Click Test to test the connection to the recipient.

6.Click OK.

Schedules

Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside ofﬁce hours. Use one of the predeﬁned schedules or create a new schedule as described below.

To create a new schedule:

1.Go to Events > Schedules and click Add.

2.Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.

3.Click OK.

37

Image 37

Contents Axis Q6034 PTZ Dome Network Camera About this Document SafetyLiability Intellectual Property RightsLearn More Axis Q6034 PTZ Dome Network Camera Table of ContentsSymptoms, Possible Causes and Remedial Actions Hardware Overview ConnectorsHardware Overview For technical speciﬁcations, seeMidspan LED Indicators LED IndicatorsColor Indication Accessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certiﬁcateControls on the Live View Live ViewAxis Media Control viewer toolbar AMC Audio Controls PTZ ControlsAxis Q6034 PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterStream Proﬁles Click Save to apply the new settingsImage 264Exposure Settings Camera SettingsImage Appearance White BalanceOverlay Image SettingsOverlay Image Go to Video & Audio Video Stream and select the Image tabPrivacy Mask Audio SettingsAudio Modes Audio InputAudio Output Audio ClipsG711 G726 Axis Q6034 PTZ Dome Network Camera Live View Conﬁg Default Viewer for BrowsersLive View Conﬁg Go to Setup Live View Conﬁg Viewer SettingsUser Deﬁned Links Output ButtonsAxis Q6034 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom AutotrackingExclude Areas ConﬁgurationMax Limits Guard Tour GatekeeperAdvanced Osdi ZonesTour Recording LimitsControl Queue Operator Same as administrator but with lower priorityControls Detectors Set Up Motion Detection WindowsDetectors Motion DetectionMotion Detection Parameters Audio DetectionApplications ApplicationsEvents EventsConvert Event Types to Action Rules Setting Up an Action RulePTZ Control Go to Events Action Rules and click AddSchedules RecipientsRecipient Use with action Go to Events Recipients and click AddGo to Events Recurrences and click Add RecurrencesRecordings RecordingsRecording List Continuous RecordingAxis Q6034 PTZ Dome Network Camera System Options System OptionsSecurity UsersIeee Date & TimeAudio Support Network Basic TCP/IP SettingsIPv4 Address Conﬁguration IPv6 Address ConﬁgurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Ports & DevicesPorts Go to System Options Storage Click Network ShareSupport MaintenanceScripting Reset to Factory Default SettingsFile Upload Plain Conﬁg192.168.0.90 Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallySetup Video & Audio Camera Settings Video and image problems, generalNo images displayed on web Overlay image is not displayedSettings Problems uploading ﬁlesStorage and disk management problems Motion Detection triggers unexpectedlyTechnical Speciﬁcations Technical SpeciﬁcationsMaintenance Installation aidPower ConnectorsMulti-Connector Cable sold separately To +40 V DC Function Pin SpeciﬁcationsMax voltage = +40 V DC With the load, for protection against voltage transientsDC power input Connection diagramPerformance Considerations Axis Q6034 PTZ Dome Network Camera M1.6