Axis Communications Q6034 user manual QoS Quality of Service, Smtp email

Page 46

AXIS Q6034 PTZ Dome Network Camera

System Options

Note

This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.

RTSP

The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Network > TCP/IP > Advanced. The default port is 554.

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark the following types of traffic: live video, live audio, event/alarm traffic and management traffic.

Note

Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.

SMTP (email)

To send email messages from the Axis product via SMTP (Simple Mail Transfer Protocol), an SMTP mail server must be set up. This is done under System Options > Network > SMTP (email).

Enter the host names or IP addresses and port numbers for the primary and secondary mail servers in the fields provided. A From email address is also required. If the mail server requires authentication, check Use authentication to log in to this server and enter the necessary information.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP. Community names are used to identify groups.

The Axis product can be configured to support SNMP on the System Options > Network > SNMP page.

Depending on the level of security required, select the version on SNMP to use.

SNMP v1/v2 provides the lowest level of security. The community name can be specified as a password for read or read/write access to all supported SNMP devices. The default password for the Read community is public and the default password for the Write community is write.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Axis Q6034 PTZ Dome Network Camera Liability SafetyAbout this Document Intellectual Property RightsLearn More Table of Contents Axis Q6034 PTZ Dome Network CameraSymptoms, Possible Causes and Remedial Actions Hardware Overview ConnectorsHardware Overview For technical specifications, seeMidspan LED Indicators LED IndicatorsColor Indication Access from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, SafariNetwork TCP/IP Advanced Access from the InternetSet the Root Password Click Create self-signed certificateControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis Q6034 PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccessing Audio Streams Java applet supports simplex audio with G.711 encodingSetting Up the Product Setting Up the ProductBasic Setup Video Stream Video and AudioVideo and Audio Pixel CounterImage Click Save to apply the new settingsStream Profiles 264Image Appearance Camera SettingsExposure Settings White BalanceOverlay Image Image SettingsOverlay Go to Video & Audio Video Stream and select the Image tabAudio Modes Audio SettingsPrivacy Mask Audio InputAudio Output Audio ClipsG711 G726 Axis Q6034 PTZ Dome Network Camera Live View Config Default Viewer for BrowsersLive View Config User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis Q6034 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom AutotrackingExclude Areas ConfigurationMax Limits Gatekeeper Guard TourTour Recording Osdi ZonesAdvanced LimitsControl Queue Operator Same as administrator but with lower priorityControls Detectors Set Up Motion Detection WindowsDetectors Motion DetectionAudio Detection Motion Detection ParametersApplications ApplicationsEvents EventsPTZ Control Setting Up an Action RuleConvert Event Types to Action Rules Go to Events Action Rules and click AddRecipient Use with action RecipientsSchedules Go to Events Recipients and click AddRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingAxis Q6034 PTZ Dome Network Camera Security System OptionsSystem Options UsersIeee Date & TimeAudio Support IPv4 Address Configuration Basic TCP/IP SettingsNetwork IPv6 Address ConfigurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourPorts Ports & DevicesNetwork Share Go to System Options Storage Click Network ShareMaintenance SupportFile Upload Reset to Factory Default SettingsScripting Plain Config192.168.0.90 Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatNo images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Overlay image is not displayedStorage and disk management problems Problems uploading filesSettings Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsPower Installation aidMaintenance ConnectorsMulti-Connector Cable sold separately Max voltage = +40 V DC Function Pin SpecificationsTo +40 V DC With the load, for protection against voltage transientsDC power input Connection diagramPerformance Considerations Axis Q6034 PTZ Dome Network Camera M1.6
Top Page Image Contents