Bosch Appliances VEZ-400 user manual Power Connections, Camera Settings, 16AWG

Page 26

26 en ConnectionVEZ-400 Mini PTZ Dome

Connecting the Alarms

Use the following table to connect alarm wires to the 8-pin terminal block from the camera:

Number		Signal	Color
1		NC	Yellow
2		COM	Orange
3		NO	Green
4		AL3	Blue
5		GND ALM	Black
6		AL2	Violet
7		AL1	Gray
8		AL0	Brown
Table 6.4	8-pin Terminal Block Connections

6.4Power Connections

CAUTION!

The camera unit accepts 24 VAC power only. Do not connect 120 V or 230 V to this camera!

The recommended power cable is a 2-conductor, 14-18 gauge cable, depending on the distance.

A/W	14 AWG	16AWG	18 AWG
	(2.5 mm)	(1.5 mm)	(1.0 mm)
2 A / 43 W (with heater)	250 m	150 m	100 m
	(820 ft)	(492 ft)	(328 ft)

6.5Camera Settings

The camera can communicate with external switching devices such as a multiplexer or a DVR by setting the Rotary and Dip switches. Refer to the tables below for setting the camera’s ID and selecting the protocol. The camera's Dip switches can be accessed by removing the dome cover, and are located on a PCB attached to the camera base.

F.01U.252.635 2.0 2011.09

User Manual

Bosch Security Systems, Inc.

Image 26

Contents VEZ-400 Mini PTZ Dome Page Table of Contents WDR/DNR Safety Safety precautionsImportant safety instructions Important notices Coax grounding Rack mount FCC & Ices compliance FCC & Ices InformationInformations FCC et Ices Modèles utilisés aux États-Unis et au Canada uniquementEn Safety VEZ-400 Mini PTZ Dome Bosch notices DisclaimerMore information CopyrightTrademarks Features DescriptionQty Description Parts ListUnpacking Model Number Description Drawing AccessoriesAdditional Tools Required Installation Overview Installing a Surface Mount Number DescriptionEn Installing a Surface Mount VEZ-400 Mini PTZ Dome VEZ-400 Mini PTZ Dome Installing a Surface Mount en Connection Typical wiring configuration RS-485 ConnectionsNumber Signal Color TRXAWG Alarm ConnectionsVideo Connection 16AWG Power ConnectionsCamera Settings SW301 Rotary switch SW303 Dip switches SW302 Rotary switch No1 No2 Protocol Setting the address ID of the cameraSetting the protocol of the camera No3 No4 Baud Rate bpsVEZ-400 Mini PTZ Dome On-Screen Display OSD MenuBasic Navigation and Common Actions CAM Test ...PASSCommand Action KEYMain Menu System SetupMain Menu Main Menu Choices DescriptionTitle Editing TitlesMenu Description Clearing Saved Functions System Setup MenuSystem Setup System InformationInitialize RebootReboot System InformationInitialize PasswordALL CAM Preset Tour Pattern Scan ETC Save Back Password Display SetupOSD Setup Display SetupOSD Setup Privacy ZonePRIVACY.## Edit Display Width Height Clear Save Back Change Select Privacy ZONE. The screen Privacy Zone Setup appearsPrivacy Zone Setup Motion/Face Detection Image SetupImage Setup Mirror Save BackMOTION/FACE Detection MD/FD Sensitivity Alarm Atime Save BackLanguage OSDSelect FOCUS/ZOOM. The screen FOCUS/ZOOM Setup appears Camera SetupCamera Setup Focus/ZoomFocus Zoom SPD Save Back WB SetupFOCUS/ZOOM Setup Mode Gain B Gain Save Back AE SetupWB Setup Mode Shut AGC Gain AGC MAX DSS Bright Save Back 4 D/N SetupAE Setup AE Mode Full Auto ManualDAY/NIGHT Detect Dtime Save Back SetupAdvanced 6 WDR/DNR Select ADVANCED. The screen Advanced Setup appearsAdvanced Setup Sharpness Backlight SaveDome Motion Setup Dome Motion SetupWDR Setup WDR Level DNR Setup DNR Level Save Back General Setup Motion Setup Home Action Calibration ExitSelect General SETUP. The screen General Setup appears General SetupMotion Setup General SetupHome Action Select Motion SETUP. The screen Motion Setup appearsMotion Setup Prop PAN/TILT Auto Flip Over Tilt Save BackAction Number Time Mode Save Back Select Home ACTION. The screen Home Action Setup appearsHome Action Setup Auto CAL Error MSG Disp Calibration Save Back Select CALIBRATION. The screen Calibration Setup appearsCalibration Setup CalibrationEdit Title Time Clear Save Back Preset SetupPreset Setup Pattern Setup Pattern SetupTOUR1 Preset only Save Back Change ID Change ACT Clear ID Tour SetupTour Setup Edit Speed Dtime Direction Mode Clear Save Back Scan SetupScan Setup OUT Priority Action Number Atime Save Alarm SetupAlarm Setup Back SET/CLEAR Troubleshooting Problem SolutionVEZ-400 Mini PTZ Dome Troubleshooting en WDR Technical SpecificationsCamera Module DNREnvironment NC/NOMechanical Dimensions Dimensions CameraPreset Key Example Number Bosch ProtocolEn Bosch Protocol VEZ-400 Mini PTZ Dome Preset Key Operation Example Number Pelco ProtocolEn Pelco Protocol VEZ-400 Mini PTZ Dome Page Bosch Security Systems, Inc