Bosch Appliances VEZ-400 user manual General Setup, Motion Setup

Page 48

48 en On-Screen Display (OSD) Menu	VEZ-400 Mini PTZ Dome

7.6.1General Setup

This menu controls general functions of the camera: power-up action, turbo speed, preset speed. To set these functions:

1.From the MAIN MENU, select DOME MOTION. The submenu DOME MOTION appears.

2.Select GENERAL SETUP. The screen GENERAL SETUP appears.

GENERAL SETUP

POWER-UP ACT.

TURBO SPEED

PRESET SPEED

SAVE

BACK

3.Select the option "Power-Up Act." The power-up action sets the function (preset, tour, pattern, and scan) that the system should perform when the power is cycled or after an alarm action.

4.Select the value "On" so that the system will resume its prior activity after an alarm or a power failure.

5.Select the option "Turbo Speed." This defines the pan and tilt speed during manual operation of Pan/Tilt only.

6.Select the appropriate value: ON or OFF.

7.Select the option "Preset Speed." This sets the speed when moving to a predefined preset.

8.Select the appropriate value:

–Fast

–Normal

–Slow

9.Save the settings.

7.6.2Motion Setup

This menu controls camera settings such as proportional pan/ tilt, auto flip, and over tilt. To set these functions:

F.01U.252.635 2.0 2011.09

User Manual

Bosch Security Systems, Inc.

Image 48

Contents VEZ-400 Mini PTZ Dome Page Table of Contents WDR/DNR Safety Safety precautionsImportant safety instructions Important notices Coax grounding Rack mount FCC & Ices compliance FCC & Ices InformationInformations FCC et Ices Modèles utilisés aux États-Unis et au Canada uniquementEn Safety VEZ-400 Mini PTZ Dome Bosch notices DisclaimerCopyright TrademarksMore information Features DescriptionParts List UnpackingQty Description Accessories Additional Tools RequiredModel Number Description Drawing Installation Overview Installing a Surface Mount Number DescriptionEn Installing a Surface Mount VEZ-400 Mini PTZ Dome VEZ-400 Mini PTZ Dome Installing a Surface Mount en Connection Typical wiring configuration RS-485 ConnectionsNumber Signal Color TRXAlarm Connections Video ConnectionAWG Power Connections Camera Settings16AWG SW301 Rotary switch SW303 Dip switches SW302 Rotary switch Setting the address ID of the camera Setting the protocol of the cameraNo1 No2 Protocol No3 No4 Baud Rate bpsOn-Screen Display OSD Menu Basic Navigation and Common ActionsVEZ-400 Mini PTZ Dome CAM Test ...PASSCommand Action KEYSystem Setup Main MenuMain Menu Main Menu Choices DescriptionEditing Titles Menu DescriptionTitle System Setup Menu System SetupClearing Saved Functions System InformationReboot RebootInitialize System InformationPassword ALL CAM Preset Tour Pattern Scan ETC Save BackInitialize Display Setup OSD SetupPassword Display SetupOSD Setup Privacy ZoneSelect Privacy ZONE. The screen Privacy Zone Setup appears Privacy Zone SetupPRIVACY.## Edit Display Width Height Clear Save Back Change Image Setup Image SetupMotion/Face Detection Mirror Save BackMD/FD Sensitivity Alarm Atime Save Back LanguageMOTION/FACE Detection OSDCamera Setup Camera SetupSelect FOCUS/ZOOM. The screen FOCUS/ZOOM Setup appears Focus/ZoomWB Setup FOCUS/ZOOM SetupFocus Zoom SPD Save Back AE Setup WB SetupMode Gain B Gain Save Back 4 D/N Setup AE SetupMode Shut AGC Gain AGC MAX DSS Bright Save Back AE Mode Full Auto ManualSetup AdvancedDAY/NIGHT Detect Dtime Save Back Select ADVANCED. The screen Advanced Setup appears Advanced Setup6 WDR/DNR Sharpness Backlight SaveDome Motion Setup WDR Setup WDR Level DNR Setup DNR Level Save BackDome Motion Setup General Setup Motion Setup Home Action Calibration ExitGeneral Setup Motion SetupSelect General SETUP. The screen General Setup appears General SetupSelect Motion SETUP. The screen Motion Setup appears Motion SetupHome Action Prop PAN/TILT Auto Flip Over Tilt Save BackSelect Home ACTION. The screen Home Action Setup appears Home Action SetupAction Number Time Mode Save Back Select CALIBRATION. The screen Calibration Setup appears Calibration SetupAuto CAL Error MSG Disp Calibration Save Back CalibrationPreset Setup Preset SetupEdit Title Time Clear Save Back Pattern Setup Pattern SetupTour Setup Tour SetupTOUR1 Preset only Save Back Change ID Change ACT Clear ID Scan Setup Scan SetupEdit Speed Dtime Direction Mode Clear Save Back Alarm Setup Alarm SetupOUT Priority Action Number Atime Save Back SET/CLEAR Troubleshooting Problem SolutionVEZ-400 Mini PTZ Dome Troubleshooting en Technical Specifications Camera ModuleWDR DNRNC/NO MechanicalEnvironment Dimensions Dimensions CameraPreset Key Example Number Bosch ProtocolEn Bosch Protocol VEZ-400 Mini PTZ Dome Preset Key Operation Example Number Pelco ProtocolEn Pelco Protocol VEZ-400 Mini PTZ Dome Page Bosch Security Systems, Inc