Bosch Appliances VEZ-400 user manual Privacy Zone, OSD Setup

Page 37

VEZ-400 Mini PTZ Dome

On-Screen Display (OSD) Menu en 37

 

 

2.Select OSD SETUP. The screen OSD SETUP appears.

OSD SETUP

LABEL POSITION

TIME

ZOOM

ID

MODE

ANGLE

SAVE

BACK

-CHANGE

-TO SETUP

3.Select the option "Label Position" to set/change the position of labels.

4.Select the value "On" to display the label position.

5.Press the button {Tele} to edit the position of labels.

6.Use the joystick to move the label up, down, left, and/or right.

7.Save the option.

8.Select any of the following labels to display:

Title (Label Position)

(Dwell) Time

Zoom (ratio)

(Camera) ID

(Operation) Mode

(PTZ) Angle

Note: You can display only selected video or characters in the video. Each element may be configured.

9. Save the option.

7.4.2Privacy Zone

A Privacy mask zone allows an administrator to program a four- sided, user-defined zone which cannot be viewed by operators. A maximum of 15 positions can be displayed on the monitor.

The mask will stay in position even with changing pan and tilt angles, and will adjust in size according to the zoom ratio [Tele/

Bosch Security Systems, Inc.

User Manual

F.01U.252.635 2.0 2011.09

Image 37
Contents VEZ-400 Mini PTZ Dome Page Table of Contents WDR/DNR Safety precautions SafetyImportant safety instructions Important notices Coax grounding Rack mount FCC & Ices Information FCC & Ices complianceModèles utilisés aux États-Unis et au Canada uniquement Informations FCC et IcesEn Safety VEZ-400 Mini PTZ Dome Disclaimer Bosch noticesTrademarks CopyrightMore information Description FeaturesUnpacking Parts ListQty Description Additional Tools Required AccessoriesModel Number Description Drawing Installation Overview Number Description Installing a Surface MountEn Installing a Surface Mount VEZ-400 Mini PTZ Dome VEZ-400 Mini PTZ Dome Installing a Surface Mount en Connection RS-485 Connections Typical wiring configurationTRX Number Signal ColorVideo Connection Alarm ConnectionsAWG Camera Settings Power Connections16AWG SW301 Rotary switch SW303 Dip switches SW302 Rotary switch Setting the protocol of the camera Setting the address ID of the cameraNo1 No2 Protocol No3 No4 Baud Rate bpsBasic Navigation and Common Actions On-Screen Display OSD MenuVEZ-400 Mini PTZ Dome CAM Test ...PASSKEY Command ActionMain Menu System SetupMain Menu Main Menu Choices DescriptionMenu Description Editing TitlesTitle System Setup System Setup MenuClearing Saved Functions System InformationReboot RebootInitialize System InformationALL CAM Preset Tour Pattern Scan ETC Save Back PasswordInitialize OSD Setup Display SetupPassword Display SetupPrivacy Zone OSD SetupPrivacy Zone Setup Select Privacy ZONE. The screen Privacy Zone Setup appearsPRIVACY.## Edit Display Width Height Clear Save Back Change Image Setup Image SetupMotion/Face Detection Mirror Save BackLanguage MD/FD Sensitivity Alarm Atime Save BackMOTION/FACE Detection OSDCamera Setup Camera SetupSelect FOCUS/ZOOM. The screen FOCUS/ZOOM Setup appears Focus/ZoomFOCUS/ZOOM Setup WB SetupFocus Zoom SPD Save Back WB Setup AE SetupMode Gain B Gain Save Back AE Setup 4 D/N SetupMode Shut AGC Gain AGC MAX DSS Bright Save Back AE Mode Full Auto ManualAdvanced SetupDAY/NIGHT Detect Dtime Save Back Advanced Setup Select ADVANCED. The screen Advanced Setup appears6 WDR/DNR Sharpness Backlight SaveWDR Setup WDR Level DNR Setup DNR Level Save Back Dome Motion SetupDome Motion Setup General Setup Motion Setup Home Action Calibration ExitMotion Setup General SetupSelect General SETUP. The screen General Setup appears General SetupMotion Setup Select Motion SETUP. The screen Motion Setup appearsHome Action Prop PAN/TILT Auto Flip Over Tilt Save BackHome Action Setup Select Home ACTION. The screen Home Action Setup appearsAction Number Time Mode Save Back Calibration Setup Select CALIBRATION. The screen Calibration Setup appearsAuto CAL Error MSG Disp Calibration Save Back CalibrationPreset Setup Preset SetupEdit Title Time Clear Save Back Pattern Setup Pattern SetupTour Setup Tour SetupTOUR1 Preset only Save Back Change ID Change ACT Clear ID Scan Setup Scan SetupEdit Speed Dtime Direction Mode Clear Save Back Alarm Setup Alarm SetupOUT Priority Action Number Atime Save Back SET/CLEAR Problem Solution TroubleshootingVEZ-400 Mini PTZ Dome Troubleshooting en Camera Module Technical SpecificationsWDR DNRMechanical NC/NOEnvironment Dimensions Camera DimensionsBosch Protocol Preset Key Example NumberEn Bosch Protocol VEZ-400 Mini PTZ Dome Pelco Protocol Preset Key Operation Example NumberEn Pelco Protocol VEZ-400 Mini PTZ Dome Page Bosch Security Systems, Inc