Bosch Appliances VEZ-400 On-Screen Display OSD Menu, Basic Navigation and Common Actions

Page 29

VEZ-400 Mini PTZ Dome

On-Screen Display (OSD) Menu en 29

 

 

7On-Screen Display (OSD) Menu

NOTICE!

Before beginning this section of the manual, you must install and connect the camera to an interface device. Refer to the Mounting Manual. Once you have installed the camera, apply power to the camera.

When the camera is powered-up, the start-up screen appears on the monitor.

VEZ-400 MINI PTZ DOME

RS-485/9600

ID001

CAM TEST ...PASS

7.1Basic Navigation and Common Actions

Camera operators can operate the camera by two methods:

Use of hot keys [Refer to Section 11 Bosch Protocol, page 63].

Use of the OSD Menu displayed on the monitor [Continue to read this chapter].

The following table identifies the symbols that depict actions of the joystick controller, or the keys on the keyboard, that control the camera.

NOTICE!

The step-by-step instructions in this chapter are written with the idea that camera operators know the joystick/keyboard commands (listed in the table below) for actions (Select, Clear, Save, Exit).

Bosch Security Systems, Inc.

User Manual

F.01U.252.635 2.0 2011.09

Image 29
Contents VEZ-400 Mini PTZ Dome Page Table of Contents WDR/DNR Safety precautions SafetyImportant safety instructions Important notices Coax grounding Rack mount FCC & Ices Information FCC & Ices complianceModèles utilisés aux États-Unis et au Canada uniquement Informations FCC et IcesEn Safety VEZ-400 Mini PTZ Dome Disclaimer Bosch noticesMore information CopyrightTrademarks Description FeaturesQty Description Parts ListUnpacking Model Number Description Drawing AccessoriesAdditional Tools Required Installation Overview Number Description Installing a Surface MountEn Installing a Surface Mount VEZ-400 Mini PTZ Dome VEZ-400 Mini PTZ Dome Installing a Surface Mount en Connection RS-485 Connections Typical wiring configurationTRX Number Signal ColorAWG Alarm ConnectionsVideo Connection 16AWG Power ConnectionsCamera Settings SW301 Rotary switch SW303 Dip switches SW302 Rotary switch Setting the protocol of the camera Setting the address ID of the cameraNo1 No2 Protocol No3 No4 Baud Rate bpsBasic Navigation and Common Actions On-Screen Display OSD MenuVEZ-400 Mini PTZ Dome CAM Test ...PASSKEY Command ActionMain Menu System SetupMain Menu Main Menu Choices DescriptionTitle Editing TitlesMenu Description System Setup System Setup MenuClearing Saved Functions System InformationReboot RebootInitialize System InformationInitialize PasswordALL CAM Preset Tour Pattern Scan ETC Save Back OSD Setup Display SetupPassword Display SetupPrivacy Zone OSD SetupPRIVACY.## Edit Display Width Height Clear Save Back Change Select Privacy ZONE. The screen Privacy Zone Setup appearsPrivacy Zone Setup Image Setup Image SetupMotion/Face Detection Mirror Save BackLanguage MD/FD Sensitivity Alarm Atime Save BackMOTION/FACE Detection OSDCamera Setup Camera SetupSelect FOCUS/ZOOM. The screen FOCUS/ZOOM Setup appears Focus/ZoomFocus Zoom SPD Save Back WB SetupFOCUS/ZOOM Setup Mode Gain B Gain Save Back AE SetupWB Setup AE Setup 4 D/N SetupMode Shut AGC Gain AGC MAX DSS Bright Save Back AE Mode Full Auto ManualDAY/NIGHT Detect Dtime Save Back SetupAdvanced Advanced Setup Select ADVANCED. The screen Advanced Setup appears6 WDR/DNR Sharpness Backlight SaveWDR Setup WDR Level DNR Setup DNR Level Save Back Dome Motion SetupDome Motion Setup General Setup Motion Setup Home Action Calibration ExitMotion Setup General SetupSelect General SETUP. The screen General Setup appears General SetupMotion Setup Select Motion SETUP. The screen Motion Setup appearsHome Action Prop PAN/TILT Auto Flip Over Tilt Save BackAction Number Time Mode Save Back Select Home ACTION. The screen Home Action Setup appearsHome Action Setup Calibration Setup Select CALIBRATION. The screen Calibration Setup appearsAuto CAL Error MSG Disp Calibration Save Back CalibrationEdit Title Time Clear Save Back Preset SetupPreset Setup Pattern Setup Pattern SetupTOUR1 Preset only Save Back Change ID Change ACT Clear ID Tour SetupTour Setup Edit Speed Dtime Direction Mode Clear Save Back Scan SetupScan Setup OUT Priority Action Number Atime Save Alarm SetupAlarm Setup Back SET/CLEAR Problem Solution TroubleshootingVEZ-400 Mini PTZ Dome Troubleshooting en Camera Module Technical SpecificationsWDR DNREnvironment NC/NOMechanical Dimensions Camera DimensionsBosch Protocol Preset Key Example NumberEn Bosch Protocol VEZ-400 Mini PTZ Dome Pelco Protocol Preset Key Operation Example NumberEn Pelco Protocol VEZ-400 Mini PTZ Dome Page Bosch Security Systems, Inc