|
|
WB SETUP
MODE
RGAIN B GAIN
SAVE
BACK
3.Select the option "Mode."
4.Select the appropriate value:
–Auto Trace White balance (ATW): Aligns the white balance automatically. (2,300 to 11,000 K)
–Indoor: 3200 K Base Mode
–Outdoor: 5400 K Base Mode
–Push WB mode: The white balance is aligned during key input. (White balance push auto key)
–Manual WB mode: Red and Blue gain values can be set by user, 0 ~ 255
–Auto White Balance mode (AWB): Wide range auto white balance mode. In this mode, the white balance is performed at a faster operating speed than ATW.
5.Select the option "R Gain" to set the red gain.
6.Select the appropriate value.
7.Select the option "B Gain."
8.Select the appropriate value.
9.Save the settings.
7.5.3AE Setup
Shutter speed controls the electronic shutter. Set the shutter speed to operate automatically (Auto) or manually (Numeric Value). The Automatic Gain Control (AGC Gain or AGC Max) adjusts the brightness of the pictures. The brightness increases as the numeric value is set higher. SSNR enhances the digital noise reduction properly. There are three settings: Low/Middle/ High. When gain levels raise, SSNR will reduce the noise to display a clearer image. When Input luminance level is too dark,
Bosch Security Systems, Inc. | User Manual | F.01U.252.635 2.0 2011.09 |