Bosch Appliances VOT-320 manual Basic Mode Network, IP address, Subnet mask, Gateway address

30 en Configuration using a Web browser VOT-320

5.5 Basic Mode: Network

The settings on this page are used to integrate the VOT-320 into an existing network. Some changes only take effect after the camera is rebooted. In this case, the Set button changes to Set and Reboot.

1.Make the desired changes.

2.Click the Set and Reboot button. The VOT-320 is rebooted and the changed settings are activated.

CAUTION!

If you change the IP address, subnet mask or gateway address, the VOT-320 is only available under the new addresses after the reboot.

DHCP

If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the VOT-320.

Certain applications (Bosch Video Client, Bosch Video Management System) use the IP address for the unique assignment of the camera. If you use these applications, the DHCP server must support the fixed assignment between IP address and MAC address, and must be appropriately set up so that, once an IP address is assigned, it is retained each time the system is rebooted.

IP address

Enter the desired IP address for the VOT-320 in this field. The IP address must be valid for the network.

Subnet mask

Enter the appropriate subnet mask for the selected IP address here.

Gateway address

If you want the camera to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).

DOC V4.5 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH