5.30 | Advanced Mode: Alarm Task Editor |
CAUTION!
Editing scripts on this page overwrites all settings and entries on the other alarm pages. This procedure cannot be reversed.
In order to edit this page, you must have programming knowledge and be familiar with the information in the Alarm Task Script Language document. You can find the document on the product CD supplied (see Section 3.1 Parts included, page 10).
As an alternative to the alarm settings on the various alarm pages, you can enter your desired alarm functions in script form here. This will overwrite all settings and entries on the other alarm pages.
1.Click the Examples link under the Alarm Task Editor field to see some script examples. A new window will open.
2.Enter new scripts in the Alarm Task Editor field or change existing scripts in line with your requirements.
3.When you are finished, click the Set button to transmit the scripts to the camera. If the transfer was successful, the message Script successfully parsed. is displayed over the text field. If it was not successful, an error message will be displayed with further information.
Bosch Sicherheitssysteme GmbH | Installation and Operating Manual | DOC V4.5 2010.09 |