Bosch Appliances VOT-320 manual Advanced Mode Licenses, SSL certificate, Maintenance log

VOT-320 Configuration using a Web browser en 79

SSL certificate

To be able to work with an SSL encrypted data connection, both ends of a connection must hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple files, onto the VOT-320.

If you wish to upload multiple files onto the VOT-320, you must select them consecutively.

NOTICE!

The certificate must be created in the format *.pem so that it can be accepted by the camera.

1.Enter the full path of the file to upload or click Browse to select the required file.

2.Next, click Upload to begin transferring the file to the camera.

3.Once all files have been successfully uploaded, the camera must be rebooted. In the

address bar of your browser, enter /reset after the IP address of the VOT-320 (for example 192.168.0.10/reset).

The new SSL certificate is valid.

Maintenance log

You can download an internal maintenance log from the camera to send it to Customer Service for support purposes. When doing this, ensure that HTTPS browser port is not set to Off and TLS 1.0-support is activated for your browser (see Section HTTPS browser port, page 71). Click Download and select a storage location for the file.

5.40 Advanced Mode: Licenses

You can enter the activation key to release additional functions or software modules.

NOTICE!

The activation key cannot be deactivated again and is not transferable to other cameras.

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC V4.5 2010.09