Bosch Appliances VOT-320 manual 2The Livepage, Image selection, Display stamping

84 en Operation VOT-320

6.2The LIVEPAGE

Once the connection is established, the Web browser displays the LIVEPAGE. It shows the live video image on the right of the browser window. Depending on the configuration, various text overlays may be visible on the live video image (see Section 5.12 Advanced Mode: Display Stamping, page 36).

Other information may be shown next to the live video image on the LIVEPAGE. The display depends on the settings on the LIVEPAGE Functions page (see Section 5.14 Advanced Mode: LIVEPAGE Functions, page 38).

Maximum number of connections

If you do not connect, the camera may have reached its maximum number of connections. Depending on the unit and network configuration, each VOT-320 can have up to 25 Web browser connections or up to 50 connections via Bosch Video Client or Bosch Video Management System.

Protected camera

If the VOT-320 is password protected against unauthorized access, the Web browser displays a corresponding message and prompts you to enter the password when you attempt to access protected areas.

NOTICE!

A VOT-320 offers the option to limit the extent of access using various authorization levels (see Section 5.10 Advanced Mode: Password, page 34).

1.Enter the user name and associated password in the corresponding text fields.

2.Click OK. If the password is entered correctly, the Web browser displays the page that was called up.

Protected network

If a RADIUS server is employed in the network for managing access rights (802.1x authentication), the VOT-320 must be configured accordingly, otherwise no communication is possible (see Section Authentication, page 74).

Image selection

You can view the image of the camera in different displays.

Click one of the tabs Stream 1, Stream 2 or M-JPEGbelow the video image to toggle between the different displays of the camera image.

Display stamping

Various overlays or "stamps" in the video image provide important status information. The overlays provide the following information:

Decoding error. The frame might show artefacts due to decoding errors. If subsequent frames reference this corrupted frame, they might also show decoding errors as well but won’t be marked with the “decoding error” icon.

Alarm flag set on media item

Communication error. Any kind of communication error is visualized by this icon. Cause can be a connection failure to the storage medium, a protocol violation with a sub component or simply a timeout. An automatic reconnection procedure is started in the background in order to recover from this error.

DOC V4.5 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH