Cisco Systems CIVS-IPC-2630V manual Described in the Resetting the IP Camera section on

Chapter 1 Overview

IP Camera Overview

Figure 1-2and the table that follows describe the items on the bottom of the 2630 IP dome.

Figure 1-2 Bottom of the 2630 IP Dome

1

5

4

3

2

1	USB port	Reserved for future use
2	Analog video output	3.5 mm video jack for video output to an analog monitor.
3	Reset button	Recessed button that reboots the IP camera or resets it to a default
		state. You can use a pin or paper clip to depress it. It can be used
		any time that the IP camera is on and can have various effects, as
		described in the “Resetting the IP Camera” section on page 2-19.

Cisco Video Surveillance 2630 IP Dome User Guide

OL-24130-02 1-5