Cisco Systems CIVS-IPC-2630V manual Advanced Setup Window, Network Settings

Page 39

Chapter 3 Configuring and Managing the IP Camera

Setup Windows

Table 3-2

Basic Setup Window Options (continued)

 

 

 

Option

 

Description

 

 

Network Settings

 

 

 

Configuration Type

Choose the option that indicates how the IP camera obtains its IP address:

 

 

Obtain Address Automatically (DHCP)—If your network includes a

 

 

DHCP server for dynamic allocation of IP addresses, choose this option

 

 

if you want DHCP to assign an IP address and subnet mask to the IP

 

 

camera. Depending on your router, the default gateway, primary DNS

 

 

server, and secondary DNS server may also be assigned. The DHCP

 

 

server must be configured to allocate static IP addresses based on MAC

 

 

addresses so that the IP camera always receives the same address.

 

 

Fixed IP Address—Choose this option if you want to manually enter an

 

 

IP address, subnet mask, and default gateway for the camera.

 

 

 

IP Address

 

If you configured the IP camera for a fixed IP address, enter that IP address.

 

 

 

Subnet Mask

 

If you configured the IP camera for a fixed IP address, enter the subnet mask

 

 

for the IP camera. Use the same value that is configured for the PCs on your

 

 

network.

 

 

 

Gateway

 

If you configured the IP camera for a fixed IP address, enter the gateway for

 

 

the IP camera. Use the same value that is configured for the PCs on your

 

 

network.

 

 

 

Primary DNS

 

Optional. Enter the IP address of the primary the DNS server that is used in

 

 

your network. Use the same value that is used for the PCs on your LAN.

 

 

Typically, your ISP provides this address.

 

 

This address is required if you use a DNS name instead of an IP address in

 

 

the SMTP Mail Server field in the Mail & FTP window.

 

 

Secondary DNS

Optional. Enter the IP address of a secondary (backup) DNS server to use if

 

 

the primary DNS server is unavailable. Enter the DNS server to be used if

 

 

the primary DNS server is unavailable.

 

 

 

Advanced Setup Window

The Advanced Setup window provides options for configuring various network and protocol settings for the IP camera.

To display the Advanced Setup window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-16, click Setup, then click Advanced Setup.

If you change any options in the Advanced Setup window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-3describes the options in the Advanced Setup window.

Cisco Video Surveillance 2630 IP Dome User Guide

 

OL-24130-02

3-7

 

 

 

Image 39
Contents Americas Headquarters Cisco Video Surveillance 2630 IP Dome User GuideCisco Video Surveillance 2630 IP Dome User Guide Iii N T E N T SSnmp Window Overview OrganizationVii Viii Features, IP Camera Overview, FeaturesIP Camera Overview Physical Details, Package Contents,Top of the 2630 IP Dome Physical DetailsOverview IP Camera Overview Bottom of the 2630 IP Dome Described in the Resetting the IP Camera section onPackage Contents Before You Begin Getting StartedInstalling the Cisco Video Surveillance 2630 IP Dome Preparing for InstallationPreventing Electrostatic Discharge Damage Passing the Audio Cable through a Ferrite Core Mounting with a Conduit Base ProcedureAttaching the Conduit Base to a Ceiling or Wall Attaching Base Plate to Conduit Base Attaching the Camera to the Base Plate See -1 onCisco Video Surveillance 2630 IP Dome User Guide Attaching the Privacy Shield and Dome Mounting with a PendantOL-24130-02 Pendant Gasket Conduit base 10 Attaching the Base Plate to the Conduit 11 Attaching the Camera to the Base Plate 12 Attaching the Privacy Shield and Dome Performing the Initial Setup of the IP CameraProtocol//ipaddress Http//203.70.212.52 Accessing the IP Camera WindowsHttps//192.168.0.100 Https//203.70.212.521024Http//203.70.212.521024 Adjusting the Video Image13 Adjusting the Camera Lens on the 2630 IP Dome Reset Type Procedure Remarks Powering the IP Camera On or OffResetting the IP Camera Cleaning the IP CameraOL-24130-02 Configuration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference See the Focus/Zoom Window See the Alarm I/O PortsSee the Audio Window section See the Privacy RegionSnmp Navigating the Configuration WindowsOption Description Setup WindowsBasic Setup Window Device SettingsOption Description Network Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window User List AdministratorMaintenance Window Firmware Window Video Window Audio/Video WindowsSettings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Audio Window Controls section onDuplex Talk and Listen Full Duplex Talk and Listen Privacy Region WindowFocus/Zoom Window Choose Simplex Talk Only , Half Duplex Talk or Listen , orSecurity Windows Initialization WindowInitialization Window, Complexity Window, Users Window section on Complexity WindowMail/FTP/HTTP Window Applications WindowsSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Primary Smtp ServerHttp Notification Mail BodyPrimary FTP Secondary FTPSystem-provided-name-value-pairs is the event information Motion Detection WindowEvent Window Trigger Event Event ScheduleNew Schedule Clear buttonAttachment Mail/FTP/HTTP Window section onSnmp Window Manual Control Settings Alarm I/O Ports WindowAlarm Input Settings Alarm Output SettingsStatus Windows System WindowSystem Status Audio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogLog List Message ExplanationSystem log messages Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24130-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Audio controls Home Window ControlsControl Description Digital zoom controlsFor related information, see the Video Window section on Snapshot controlsSave IP camera controlsAccessing the Primary H.264 Stream Accessing Secondary H.264 StreamViewing Video through Third-Party Devices or Software Accessing Dual Streams H.264 + Mjpeg Accessing the Primary MPEG-4 StreamAccessing Dual MPEG-4 Streams Accessing the Mjpeg StreamAccessing Dual Streams MPEG-4 + Mjpeg OL-24130-02 Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24130-02 IN-1 D EIN-2 IN-3 DSCP, for QoS Dual streamingIN-4 SdramIN-5 LEDIN-6 Options OverviewIN-7 IN-8