Cisco Systems CIVS-IPC-2630V manual Installing the Cisco Video Surveillance 2630 IP Dome

Page 14

Chapter 2 Getting Started

Installing the Cisco Video Surveillance 2630 IP Dome

Warning The power supply must be placed indoors. Statement 331

Note If you use the IP camera outdoors, place the camera and the power supply in a suitable NEMA enclosure.

Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045

Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019

Preventing Electrostatic Discharge Damage

•Camera components can be damaged by static electricity. Not exercising the proper electrostatic discharge (ESD) precautions can result in intermittent or complete component failures, and cause the camera to malfunction.

•To minimize the potential for ESD damage:

–Before you install the IP camera, touch a metal object with your hand to release any static electricity that is in your body.

–Always use an ESD-preventive antistatic wrist strap (or ankle strap) and ensure that it makes good skin contact.

–For safety, periodically check the resistance value of the antistatic strap. The measurement should be between 1 and 10 megohm (Mohm).

In addition, follow these guidelines during installation:

•Handle camera unit by holding the edges only; avoid touching the printed circuit boards

•Never attempt to remove the printed circuit board

Installing the Cisco Video Surveillance 2630 IP Dome

The following sections describes how to install the Cisco Video Surveillance IP dome:

•Preparing for Installation, page 2-2

•Mounting with a Conduit Base, page 2-4

•Mounting with a Pendant, page 2-9

Preparing for Installation

Before you install the IP dome, follow these guidelines:

•Carefully unpack the IP dome and its components.

•Run an category 5 or higher network cable to the mounting location.

Cisco Video Surveillance 2630 IP Dome User Guide

2-2	OL-24130-02

Image 14

Contents Cisco Video Surveillance 2630 IP Dome User Guide Americas HeadquartersCisco Video Surveillance 2630 IP Dome User Guide N T E N T S IiiSnmp Window Vii OverviewOrganization Viii Features Features, IP Camera Overview,Physical Details, Package Contents, IP Camera OverviewPhysical Details Top of the 2630 IP DomeOverview IP Camera Overview Described in the Resetting the IP Camera section on Bottom of the 2630 IP DomePackage Contents Getting Started Before You BeginPreventing Electrostatic Discharge Damage Installing the Cisco Video Surveillance 2630 IP DomePreparing for Installation Passing the Audio Cable through a Ferrite Core Procedure Mounting with a Conduit BaseAttaching the Conduit Base to a Ceiling or Wall Attaching Base Plate to Conduit Base See -1 on Attaching the Camera to the Base PlateCisco Video Surveillance 2630 IP Dome User Guide Mounting with a Pendant Attaching the Privacy Shield and DomeOL-24130-02 Pendant Gasket Conduit base 10 Attaching the Base Plate to the Conduit 11 Attaching the Camera to the Base Plate Performing the Initial Setup of the IP Camera 12 Attaching the Privacy Shield and DomeProtocol//ipaddress Https//203.70.212.521024 Accessing the IP Camera WindowsHttps//192.168.0.100 Http//203.70.212.52Adjusting the Video Image Http//203.70.212.52102413 Adjusting the Camera Lens on the 2630 IP Dome Cleaning the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksOL-24130-02 Configuring and Managing the IP Camera Configuration OverviewConfiguration Item Explanation Guidelines for Use Reference See the Privacy Region See the Alarm I/O PortsSee the Audio Window section See the Focus/Zoom WindowNavigating the Configuration Windows SnmpDevice Settings Setup WindowsBasic Setup Window Option DescriptionOption Description Advanced Setup Window Network SettingsOption BonjourOption Description IP Filter Window QoSEAP-FAST Options Eapol WindowEAP-TLS Options Users Window Administration WindowsUsers Window, Maintenance Window, Firmware Window, Administrator User ListMaintenance Window Firmware Window Audio/Video Windows Video WindowDual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for SettingsMPEG-4 Settings Mjpeg Settings Resolution Choose the resolution of the Mjpeg video streamVideo Adjustment PAL/50 HzOptions Day/Night VisionOption Description Duplex Talk and Listen Audio WindowControls section on Choose Simplex Talk Only , Half Duplex Talk or Listen , or Privacy Region WindowFocus/Zoom Window Full Duplex Talk and ListenInitialization Window, Complexity Window, Security WindowsInitialization Window Complexity Window Users Window section onApplications Windows Mail/FTP/HTTP WindowPrimary Smtp Server Described in the Basic Setup Window section onMail Setup Secondary Smtp ServerSecondary FTP Mail BodyPrimary FTP Http NotificationMotion Detection Window System-provided-name-value-pairs is the event informationEvent Window Clear button Event ScheduleNew Schedule Trigger EventMail/FTP/HTTP Window section on AttachmentSnmp Window Alarm Output Settings Alarm I/O Ports WindowAlarm Input Settings Manual Control SettingsSystem Status Status WindowsSystem Window Audio Setting Audio/Video WindowNetwork Window Syslog & Log WindowLocal Log Sys Log ServerSystem log messages Log ListMessage Explanation Syslog and Log Information Address Address1 Port1 Address2 Port2 , User FTP log messagesVideo Log Window Smtp log messagesDelete button Delete All buttonOL-24130-02 Viewing Video through the Home Window Overview Home Window OverviewHome Window Digital zoom controls Home Window ControlsControl Description Audio controlsIP camera controls Snapshot controlsSave For related information, see the Video Window section onViewing Video through Third-Party Devices or Software Accessing the Primary H.264 StreamAccessing Secondary H.264 Stream Accessing the Mjpeg Stream Accessing the Primary MPEG-4 StreamAccessing Dual MPEG-4 Streams Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg OL-24130-02 Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section onOL-24130-02 D E IN-1IN-2 DSCP, for QoS Dual streaming IN-3Sdram IN-4LED IN-5Options Overview IN-6IN-7 IN-8