Cisco Systems CIVS-IPC-2630V manual Eapol Window, EAP-TLS Options, EAP-FAST Options

Chapter 3 Configuring and Managing the IP Camera

Setup Windows

Table 3-4	IP Filter Window Options (continued)
Option		Description
Single/Range		If you enable IP address filtering, choose either of the following options
		from as many drop-down lists as needed:
		• Single—Enter an IP address that is denied or allowed access to the IP
		camera, depending on the Options setting.
		• Range—Enter a range of IP address that is denied or allowed access to
		the IP camera, depending on the Options setting.

EAPOL Window

The EAPOL window provides options for configuring Extensible Authentication Protocol Over LANs (EAPOL). This protocol is used to authenticate and control user traffic in an 802.1x network.

To display the EAPOL window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-16, click Setup, then click EAPOL.

If you change any options in the EAPOL window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-5describes the options in the EAPOL window.

Table 3-5 EAPOL Window Options

Option	Description
Enable EAPOL	Check this check box to enable EAPOL on the IP camera.
EAP-TLS Options

Note These options appear if you check the Enable EAPOL check box and then choose EAP-TLSfrom the Protocol Type drop-down list.

User ID	User identifier that is used to log in to the RADIUS server.
Root Certificate	Path and folder on this PC or location of a Windows network shared folder
	where the root certificate file is stored. You can click Browse to find this
	location. After you enter this information, click Upload to upload the
	certificate from the local PC to the IP camera.
Validate Root	Check this check box if you want the identity of the RADIUS server to be
Certificate	validated.
User Certificate	Path and folder on this PC where the user certificate file is stored. You can
	click Browse to find this location. After you enter this information, click
	Upload to upload the certificate from the local PC to the IP camera.
Password	IP camera client log in password for the RADIUS server.
EAP-FAST Options

Note These options appear if you check the Enable EAPOL check box and then choose EAP-FASTfrom the Protocol Type drop-down list.

Allow Automatic PAC Provisioning

Check this check box if you want to allow authentication servers to establish a secure connection with the IP camera so that they can provide the IP camera with new Protected Access Credentials (PACs).

	Cisco Video Surveillance 2630 IP Dome User Guide
OL-24130-02		3-11