Cisco Systems CIVS-IPC-2630V manual Status Windows, System Window, System Status

Page 68

Chapter 3 Configuring and Managing the IP Camera

Status Windows

Status Windows

The Status windows provide options for viewing and managing a variety of system information. The following sections describe the Status windows in detail:

•System Window, page 3-36

•Audio/Video Window, page 3-37

•Network Window, page 3-38

•Syslog & Log Window, page 3-38

•Video Log Window, page 3-44

System Window

The System window displays information about the IP camera.

To display the System window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-16, click Status, then click System.

To make sure that the System window shows the most current information, click the Refresh button. Table 3-20describes the options in the System window. All options are for display only.

Table 3-20	System Window Options

Option		Description

System Status

Firmware Version		Version of the firmware that is installed on the IP camera.

Hardware Version		Not used.

Sensor Firmware		Version of the sensor firmware that is installed by the factory on the IP
Version		camera.

MAC Address		MAC address of the IP camera.

Camera Name		Name of the IP camera, as configured in the Basic Setup window. For more
		information, see the “Basic Setup Window” section on page 3-5.

Description		Description of the IP camera, as configured in the Basic Setup window. For
		more information, see the “Basic Setup Window” section on page 3-5.

Date/Time		Current date and time of the IP camera. To set the date and time, see the
		“Basic Setup Window” section on page 3-5.

UDI
Note The Unique Device Identifier (UDI) provides information about Cisco devices.

Product Identifier		Cisco product ID of the IP camera.

Version Identifier		Not used.

Serial Number		Serial number of the IP camera.

Entity Name		Cisco top level assembly part number of the IP camera.

Product Description		Revision of the Cisco top level assembly part number.

	Cisco Video Surveillance 2630 IP Dome User Guide
3-36	OL-24130-02

Image 68

Contents Cisco Video Surveillance 2630 IP Dome User Guide Americas HeadquartersCisco Video Surveillance 2630 IP Dome User Guide N T E N T S IiiSnmp Window Vii OverviewOrganization Viii Features Features, IP Camera Overview,Physical Details, Package Contents, IP Camera OverviewPhysical Details Top of the 2630 IP DomeOverview IP Camera Overview Described in the Resetting the IP Camera section on Bottom of the 2630 IP DomePackage Contents Getting Started Before You BeginPreventing Electrostatic Discharge Damage Installing the Cisco Video Surveillance 2630 IP DomePreparing for Installation Passing the Audio Cable through a Ferrite Core Procedure Mounting with a Conduit BaseAttaching the Conduit Base to a Ceiling or Wall Attaching Base Plate to Conduit Base See -1 on Attaching the Camera to the Base PlateCisco Video Surveillance 2630 IP Dome User Guide Mounting with a Pendant Attaching the Privacy Shield and DomeOL-24130-02 Pendant Gasket Conduit base 10 Attaching the Base Plate to the Conduit 11 Attaching the Camera to the Base Plate Performing the Initial Setup of the IP Camera 12 Attaching the Privacy Shield and DomeProtocol//ipaddress Accessing the IP Camera Windows Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.52Adjusting the Video Image Http//203.70.212.52102413 Adjusting the Camera Lens on the 2630 IP Dome Powering the IP Camera On or Off Resetting the IP CameraCleaning the IP Camera Reset Type Procedure RemarksOL-24130-02 Configuring and Managing the IP Camera Configuration OverviewConfiguration Item Explanation Guidelines for Use Reference See the Alarm I/O Ports See the Audio Window sectionSee the Privacy Region See the Focus/Zoom WindowNavigating the Configuration Windows SnmpSetup Windows Basic Setup WindowDevice Settings Option DescriptionOption Description Advanced Setup Window Network SettingsOption BonjourOption Description IP Filter Window QoSEAP-FAST Options Eapol WindowEAP-TLS Options Users Window Administration WindowsUsers Window, Maintenance Window, Firmware Window, Administrator User ListMaintenance Window Firmware Window Audio/Video Windows Video WindowDual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for SettingsMPEG-4 Settings Mjpeg Settings Resolution Choose the resolution of the Mjpeg video streamVideo Adjustment PAL/50 HzOptions Day/Night VisionOption Description Duplex Talk and Listen Audio WindowControls section on Privacy Region Window Focus/Zoom WindowChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenInitialization Window, Complexity Window, Security WindowsInitialization Window Complexity Window Users Window section onApplications Windows Mail/FTP/HTTP WindowDescribed in the Basic Setup Window section on Mail SetupPrimary Smtp Server Secondary Smtp ServerMail Body Primary FTPSecondary FTP Http NotificationMotion Detection Window System-provided-name-value-pairs is the event informationEvent Window Event Schedule New ScheduleClear button Trigger EventMail/FTP/HTTP Window section on AttachmentSnmp Window Alarm I/O Ports Window Alarm Input SettingsAlarm Output Settings Manual Control SettingsSystem Status Status WindowsSystem Window Audio Setting Audio/Video WindowNetwork Window Syslog & Log WindowLocal Log Sys Log ServerSystem log messages Log ListMessage Explanation Syslog and Log Information Address Address1 Port1 Address2 Port2 , User FTP log messagesVideo Log Window Smtp log messagesDelete button Delete All buttonOL-24130-02 Viewing Video through the Home Window Overview Home Window OverviewHome Window Home Window Controls Control DescriptionDigital zoom controls Audio controlsSnapshot controls SaveIP camera controls For related information, see the Video Window section onViewing Video through Third-Party Devices or Software Accessing the Primary H.264 StreamAccessing Secondary H.264 Stream Accessing the Primary MPEG-4 Stream Accessing Dual MPEG-4 StreamsAccessing the Mjpeg Stream Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg OL-24130-02 Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section onOL-24130-02 D E IN-1IN-2 DSCP, for QoS Dual streaming IN-3Sdram IN-4LED IN-5Options Overview IN-6IN-7 IN-8