Cisco Systems CIVS-IPC-2630V manual Option, Bonjour

Chapter 3 Configuring and Managing the IP Camera

Setup Windows

Table 3-3 Advanced Setup Window Options

Option

CDP

Description

Enable CDP (Cisco Discovery Protocol)

Check this check box if CDP is enabled in your network and you want the IP camera to send CDP discovery messages.

Bonjour

Enable Bonjour (Cisco Discovery Protocol)

Check this check box if Bonjour is enabled in your network and you want the IP camera to send Bonjour discovery messages.

Bonjour enables the automatic discovery of computers, devices, and services on and IP network.

HTTP/HTTPS

Enable HTTP	Check this check box to enable Internet access to the IP camera through an
Alternative Port	HTTP port other than the default port 80. If you enable this option, enter a
	port number from 1024 through 65535.
	If you configure an alternative HTTP port, you must specify the port number
	in the URL for the IP camera when you access it through an HTTP
	connection. For example, if the IP address of the IP camera is 192.168.1.100
	and the alternative HTTP port is 1024, enter this URL for the IP camera:
	http://192.168.1.100:1024.
Enable HTTPS	Check this check box to enable Internet access to the IP camera through an
Alternative Port	HTTPS port other than the default port 443. If you enable this option, enter
	a port number from 1024 through 65535.
	If you configure an alternative HTTPS port, you must specify the port
	number in the URL for the IP camera when you access it through an HTTPS
	connection. For example, if the IP address of the IP camera is 192.168.1.100
	and the alternative HTTPS port is 1024, enter this URL for the IP camera:
	https://192.168.1.100:1024.
RTP/RTSP
RTSP Port	Transmission Control Protocol (TCP) port on which the IP camera receives
	Real-Time Streaming Protocol (RTSP) commands. You must configure this
	port to allow third-party devices or software to access video streams from the
	IP camera.
	RTSP is a standard for connecting a client to control streaming data
	(MPEG-4) over the web.
	Valid values are 554 and 1024 through 65535. The default value is 554.
RTP Data Port	Universal Data Protocol (UDP) port on which the IP camera transmits
	Real-Time Transport Protocol (RTP) data.
	RTP is a standard for transmitting real-time data, such as audio and video, to
	selected clients.
	Valid values are 1024 through 65535. The default value is 5000. The default
	value can be used for multicasting and typically does not need to be changed.

Cisco Video Surveillance 2630 IP Dome User Guide

3-8 OL-24130-02