FOCUS MODE |
|
| |
You can select a focus mode according to the |
|
| |
angle that you adjusted for camera recording. | DAY/NIGHT | AUTO | |
- AF : This will monitor the screen continuously | |||
WHITE BAL |
| ||
to focus automatically. If you adjust the focus | FOCUS MODE | ONEAF | |
manually, that will operate the same as in | ZOOM SPEED | [2] | |
<MF>. This will also restore focus after the | DISPLAY ZOOM | OFF | |
DISPLAY P/T | OFF | ||
operation of pan/tile/zoom. | |||
DIGITAL ZOOM | X16 | ||
- ONEAF : Restores focus after the operation | DETAIL | [2] | |
INT | |||
of pan/tile/zoom, and operates the same as | |||
|
| ||
in <MF> unless the operation of pan/tile/ |
|
| |
zoom is executed. |
|
|
- MF : You can adjust the focus manually.
M | While you are working on the following objects, <AF> may not work properly. |
| If this is the case, use <MF> instead. |
| - Very bright object, or dominant object in a dark scene |
| - Object against the rear side of a moist or dirty glass |
| - A scene where nearby and distant objects |
| - White wall or |
| - Venetian blinds and other horizontally striped objects |
ZOOM SPEED
You can adjust the zoom operation speed.
DISPLAY ZOOM
You can set to display the zoom status on the screen.
It will disappear in about 3 seconds if the zoom factor has no further change.
DISPLAY P/T
You can set to display the operation status of pan/tilt when it is active.
It will disappear in about 3 seconds if the pan/tilt position has no further change. However, the allowable error is ±2°.
DIGITAL ZOOM
You can set the maximum allowable digital zoom ratio.
Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of x43. If you set DIGITAL ZOOM to x16, you can take a shot at up to x688 (43x16).
DETAIL
Used to adjust the vertical and horizontal distinction, respectively.
English _31
English