Pioneer AVH-P4950DVD operation manual Changing the wide screen mode, Adjusting the LCD panel angle

Section

03 Operating this unit

!When the ignition switch is turned OFF after the LCD panel has been closed, turn- ing the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE to open the LCD panel.

!When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage.

CAUTION

Keep hands and fingers clear of the unit when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fin- gers.

%Press OPEN/CLOSE to open the LCD panel.

# To close the LCD panel, press OPEN/CLOSE again.

Adjusting the LCD panel angle

Important

!If you can hear the LCD panel knocking against your vehicle’s console or dashboard, press ANGLE (–) to move the LCD panel a lit- tle forward.

!When adjusting the LCD panel angle, be sure to press ANGLE (+/–). Forcibly adjusting the LCD panel by hand may damage it.

%Press ANGLE (+/–) to adjust the LCD panel to an easily viewable angle.

The LCD panel angle continues changing as long as you press ANGLE (+/–) and hold.

#The adjusted LCD panel angle will be memor- ized and automatically returned to the next time the LCD panel is opened.

Turning the LCD panel horizontal

When the LCD panel is upright and it hinders the operation of the air conditioner, the panel can be turned horizontal temporarily.

%Press FLIP DOWN to turn the LCD panel horizontal.

# To return to original position, press FLIP DOWN again.

# The LCD panel returns to the original position automatically with beeping sound 10 seconds after operation.

Changing the wide screen mode

You can select a desired mode for enlarging a 4:3 picture to a 16:9 one.

%Press WIDE to select the desired set- ting.

Press WIDE repeatedly to switch between the following settings:

FULL (full)—JUST (just)—CINEMA (cinema)— ZOOM (zoom)—NORMAL (normal)

18 En