Pioneer AVH-P4950DVD operation manual Using the time alignment, Adjusting the time alignment

Page 65

Available accessories

4Touch cor dto adjust the speaker out- put level.

Each time you touch cor dincreases or de- creases the speaker output level. +10 to –10 is displayed as the level is increased or de- creased.

# The test tone rotates to the next speaker after about two seconds from the last operation.

5Touch STOP to stop the test tone out- put.

Notes

!You can also display the speaker output level menu by pressing BOOST button.

!If needed, select speakers and adjust their ‘ab- solute’ output levels. (Refer to Adjusting the speaker output levels on the previous page.)

!To adjust the speaker output levels in this mode is the same as making the speaker out- put levels at SP LEVEL. Both provide the same results.

Using the time alignment

The time alignment lets you adjust the dis- tance between each speaker and the listening position.

1Touch NEXT on the DSP function menu.

2Touch TIME ALIGN.

3Touch any of the following touch panel keys to select the time alignment.

!INIT – Initial time alignment (factory set- ting)

!AUTOTA – Time alignment created by auto TA and EQ. (Refer to Auto TA and EQ (auto- time alignment and auto-equalizing) on page 67.)

!CUSTOM – Adjusted time alignment that you can create for yourself

Section

04

! OFF – Turn the time alignment off

 

! ADJUST – Adjust the time alignment as de-

 

sired

 

# You cannot select AUTOTA if auto TA and EQ

 

has not been carried out.

Available

# You cannot select ADJUST when neither

 

FRONT-L nor FRONT-R is selected in POSITION.

 

Adjusting the time alignment

accessories

You can adjust the distance between each

 

speaker and the selected position.

 

! An adjusted time alignment is memorized

 

in CUSTOM.

 

1Touch NEXT on the DSP function menu.

2Touch TIME ALIGN and then touch

ADJUST.

# You cannot select ADJUST when neither FRONT-L nor FRONT-R is selected in POSITION.

3Touch aor bto select the speaker to be adjusted.

Each time you touch aor bselects the speak- er in the following order:

FRONT-L (front speaker left)—CENTER (center speaker)—FRONT-R (front speaker right)— REAR-R (rear speaker right)—REAR-L (rear speaker left)—SUB WOOFER (subwoofer)

# You cannot select speakers whose size is set at OFF.

4Touch cor dto adjust the distance be- tween the selected speaker and the listen- ing position.

Each time you touch cor dincreases or de- creases the distance. 0.0 to 500 cm is dis- played as the distance is increased or decreased.

5Touch ESC to return to the playback dis- play.

En 65

Image 65
Contents AVH-P4950DVD Setting up the DVD player Initial Settings ContentsTo ensure safe driving Before You Start About this unitTo ensure safe driving PrecautionsParking brake interlock To avoid battery exhaustionDVD video disc region numbers Before You Start About this unitPlayable discs Visit our website FeaturesBefore You Start Start About WMABefore You Start To protect the LCD screen When an operation is prohibitedFor viewing LCD comfortably What the marks on DVDs indicateUse and care of the remote control Resetting the microprocessorInstalling the battery Removing the front panelUsing the remote control Head unit Operating this unitWhat’s What 12 En Remote control 14 En AVH mode operation Using the remote control operation mode switchDVD mode operation TV mode operationAdjusting the volume Power ON/OFFOperating this unit Basic Operations Selecting a sourceOpening and closing the LCD panel Touch panel key basic operationActivating the touch panel keys Operating the menuTurning the LCD panel horizontal Changing the wide screen modeAdjusting the LCD panel angle Picture Adjust Changing the picture adjustmentHUE hue for each source and rear view cam Tively, as the ambient light sensor deterAdjusting the dimmer Storing and recalling broadcast frequencies Operating this unit TunerBasic Operations Storing the strongest broadcast frequencies Tuning in strong signalsIntroduction of advanced tuner operation Operating this unit Built-in DVD player On, this unit will cancel the DVD menu# With some DVD discs, a menu may be dis Played. Refer to Operating the DVD menu onTouch a, b, cor dto select the desired menu item Operating the DVD menuTails, refer to Resume playback Bookmark on Specifying title Skipping back or forward to another titleOperating the DVD menu with 10 key Changing audio language during playback Multi-audio Changing the viewing angle during playback Multi-angle Pausing disc playbackStopping playback Frame-by-frame playbackReturn to the specified scene Slow motion playbackAutomatic playback of DVDs PBC playbackDisplaying text information Text informationScrolling text information in the display Displaying information on compressed audioRepeating play Introduction of advanced operationsPlaying tracks in random order FolderSelecting audio output Scanning tracks of a CDResume playback Bookmark Entering disc titlesSelecting tracks from the track title list Introduction of audio adjustments Operating this unit Audio AdjustmentsUsing balance adjustment You can change the fader/balance setting soAdjusting equalizer curves Using the equalizerPOWERFUL-NATURAL-VOCAL-CUSTOM FLAT-SUPER Bass Recalling equalizer curvesAdjusting loudness Adjusting bass and trebleUsing subwoofer output Adjusting bassBoosting the subwoofer level Using nonfading outputUsing the high pass filter Compensating for equalizer curves EQ-EX Adjusting source levelsMenu Touch EQ-EX Touch ato turn EQ-EX on # To turn EQ-EX off, touch bIntroduction of DVD setup adjustments Operating this unit Setting up the DVD playerSetting the subtitle language Setting the audio languageSwitching the assist subtitle on Setting the menu languageSetting the angle icon display Setting the aspect ratioSetting the code number and level Setting the parental lockChanging the level You can change the set parental lock levelIf you forget your code number Setting remote control code typeAdjusting initial settings Operating this unit Initial SettingsSetting the FM tuning step Setting the AM tuning stepSetting the rear output and subwoofer controller Switching the auxiliary settingSetting the illumination switch Resetting the audio functions Switching the sound muting/ attenuationSetting the TV signal Correcting distorted soundSetting the AV input Introduction of setup adjustmentsOther Functions DispSetting the automatic open function Setting for rear view camera back up cameraUsing the AUX source Setting the clockSetting the AUX title Selecting AUX as the sourceSelecting the background display Using the PGM buttonListening to songs on your iPod Available accessories Playing songs on iPodBrowsing for a song AlbumPausing a song Available accessoriesOFF Cancel the random play Displaying text information on iPodVious track Available accessories Multi-CD PlayerCreating a playlist with ITS programming Using ITS playlistsFunction and operation Erasing a track from your ITS playlist Playback from your ITS playlistErasing a CD from your ITS playlist You can delete all tracks of a CD from your ITSUsing compression and bass emphasis Using CD Text functionsDVD Player Displaying disc titlesSelecting a folder Play mode, Random mode, Scan modeSelecting a disc TV tuner Introduction of advanced Storing and recalling broadcast stationsOperations Storing the strongest broadcast stations sequentiallySelecting the area group Digital Signal ProcessorIntroduction of DSP adjustments Time Align Using the sound field controlPress EQ and hold until SFC appears Press EQ to select the desired SFCUsing the position selector Using the down-mix function Using the dynamic range controlUsing the direct control Using the Dolby Pro LogicAdjusting the Music mode Setting the speaker settingSelecting a cross-over frequency Correcting the subwoofer’s phaseSelect reverse phase and Reverse appears Adjusting the speaker output levels using a test tone Adjusting the speaker output levelsAdjust Using the time alignmentAdjusting the time alignment POWERFUL-NATURAL-VOCAL-FLAT- CUSTOM1-CUSTOM2-SUPER Bass Adjusting 3-band parametric equalizerCar interior acoustic characteristics, Using the auto-equalizerAuto TA and EQ auto-time alignment and auto-equalizing # To turn auto-equalizer off, touch bCarrying out auto TA and EQ Before operating the auto TA and EQ function# To stop auto TA and EQ, touch Stop Acoustic characteristics is not possible, anTouch ESC to cancel the auto TA and EQ Common Additional Information TroubleshootingAdditional Information Problems during DVD playbackProblems during Video CD playback Understanding auto TA and EQ error messages Additional Information Error messagesAdditional Additional Information Understanding messagesCD-R/CD-RW discs DVD discsAvchd recorded discs Compressed audio files on Dual DiscsDisc Album names and other text informationExample of a hierarchy Using the display correctlyCompressed audio compatibility Handling the displaySmall fluorescent tube Liquid crystal display LCD screenKeeping the display in good condition Language code, input code Additional Information Language code chart for DVDDTS Additional Information TermsMpeg VBR General Additional Information SpecificationsDisplay AudioAM tuner FM tunerAudio language IndexKsnzf 07B00000 CRB2345-A RD, RI,RC Meguro 1-CHOME, MEGURO-KU Tokyo 153-8654, Japan