Pioneer AVH-P4950DVD Setting the menu language, Switching the assist subtitle on, Or off

Page 39

Operating this unit

1Touch SETUP and LANGUAGE and then touch AUDIO LANG.

Audio language menu is displayed and the currently selected language is highlighted.

# To switch to the second language select menu, touch NEXT.

# To return to the first language select menu, touch PREV.

2Touch the desired language.

The audio language is set.

#If you have selected OTHERS, refer to When you select OTHERS on the previous page.

Notes

!If the selected language is not recorded on the disc, the language specified on the disc is outputted.

!You can also switch the audio language by touching AUDIO during playback. (Refer to Changing audio language during playback (Multi-audio) on page 26.)

!Even if you use AUDIO during playback to switch the audio language, this does not af- fect the settings here.

Setting the menu language

You can set the preferred language for dis- plays of menus recorded on a disc.

1Touch SETUP and LANGUAGE and then touch MENU LANG.

A menu language menu is displayed and the currently set language is highlighted.

# To switch to the second language select menu, touch NEXT.

# To return to the first language select menu, touch PREV.

2Touch the desired language.

The menu language is set.

#If you have selected OTHERS, refer to When you select OTHERS on the previous page.

Section

03

Note

 

If the selected language is not recorded on the

Operating

Switching the assist subtitle on

disc, the language specified on the disc is dis-

 

played.

 

or off

this

If assist subtitles are recorded on a DVD disc,

unit

you can display them by turning the assist

subtitle function on.

You can turn assist subtitles on or off as de-

 

sired.

 

1Touch SETUP and LANGUAGE and then touch NEXT.

2Touch A SUB TITL to turn assist subtitles

on.

# To turn the assist subtitle off, touch A SUB TITL again.

Setting the angle icon display

You can set it up so that the angle icon ap- pears on scenes where the angle can be switched.

1Touch SETUP and VISUAL to display the DVD visual set up menu.

2Touch M. ANGLE to turn angle icon dis- play on.

# To turn the angle icon display off, touch M. ANGLE again.

Setting the aspect ratio

There are two kinds of display. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. Be sure to select the correct TV aspect for the display connected to VIDEO OUTPUT.

En 39

Image 39
Contents AVH-P4950DVD Before You Start About this unit ContentsSetting up the DVD player Initial Settings To ensure safe drivingTo ensure safe driving PrecautionsParking brake interlock To avoid battery exhaustionBefore You Start About this unit Playable discsDVD video disc region numbers Features Before You StartVisit our website Start About WMAWhat the marks on DVDs indicate When an operation is prohibitedBefore You Start To protect the LCD screen For viewing LCD comfortablyRemoving the front panel Resetting the microprocessorUse and care of the remote control Installing the batteryUsing the remote control Operating this unit What’s WhatHead unit 12 En Remote control 14 En TV mode operation Using the remote control operation mode switchAVH mode operation DVD mode operationSelecting a source Power ON/OFFAdjusting the volume Operating this unit Basic OperationsOperating the menu Touch panel key basic operationOpening and closing the LCD panel Activating the touch panel keysChanging the wide screen mode Adjusting the LCD panel angleTurning the LCD panel horizontal Tively, as the ambient light sensor deter Changing the picture adjustmentPicture Adjust HUE hue for each source and rear view camAdjusting the dimmer Operating this unit Tuner Basic OperationsStoring and recalling broadcast frequencies Tuning in strong signals Introduction of advanced tuner operationStoring the strongest broadcast frequencies Played. Refer to Operating the DVD menu on On, this unit will cancel the DVD menuOperating this unit Built-in DVD player # With some DVD discs, a menu may be disOperating the DVD menu Tails, refer to Resume playback Bookmark onTouch a, b, cor dto select the desired menu item Skipping back or forward to another title Operating the DVD menu with 10 keySpecifying title Changing audio language during playback Multi-audio Frame-by-frame playback Pausing disc playbackChanging the viewing angle during playback Multi-angle Stopping playbackPBC playback Slow motion playbackReturn to the specified scene Automatic playback of DVDsDisplaying information on compressed audio Text informationDisplaying text information Scrolling text information in the displayFolder Introduction of advanced operationsRepeating play Playing tracks in random orderEntering disc titles Scanning tracks of a CDSelecting audio output Resume playback BookmarkSelecting tracks from the track title list You can change the fader/balance setting so Operating this unit Audio AdjustmentsIntroduction of audio adjustments Using balance adjustmentRecalling equalizer curves Using the equalizerAdjusting equalizer curves POWERFUL-NATURAL-VOCAL-CUSTOM FLAT-SUPER BassAdjusting bass Adjusting bass and trebleAdjusting loudness Using subwoofer output Using nonfading output Using the high pass filter Boosting the subwoofer level # To turn EQ-EX off, touch b Adjusting source levelsCompensating for equalizer curves EQ-EX Menu Touch EQ-EX Touch ato turn EQ-EX onSetting the audio language Operating this unit Setting up the DVD playerIntroduction of DVD setup adjustments Setting the subtitle languageSetting the aspect ratio Setting the menu languageSwitching the assist subtitle on Setting the angle icon displayYou can change the set parental lock level Setting the parental lockSetting the code number and level Changing the levelIf you forget your code number Setting remote control code typeSetting the AM tuning step Operating this unit Initial SettingsAdjusting initial settings Setting the FM tuning stepSwitching the auxiliary setting Setting the illumination switchSetting the rear output and subwoofer controller Correcting distorted sound Switching the sound muting/ attenuationResetting the audio functions Setting the TV signalDisp Introduction of setup adjustmentsSetting the AV input Other FunctionsSetting the automatic open function Setting for rear view camera back up cameraSelecting AUX as the source Setting the clockUsing the AUX source Setting the AUX titleSelecting the background display Using the PGM buttonAlbum Available accessories Playing songs on iPodListening to songs on your iPod Browsing for a songDisplaying text information on iPod Available accessoriesPausing a song OFF Cancel the random playVious track Available accessories Multi-CD PlayerUsing ITS playlists Function and operationCreating a playlist with ITS programming You can delete all tracks of a CD from your ITS Playback from your ITS playlistErasing a track from your ITS playlist Erasing a CD from your ITS playlistDisplaying disc titles Using CD Text functionsUsing compression and bass emphasis DVD PlayerPlay mode, Random mode, Scan mode Selecting a discSelecting a folder TV tuner Storing the strongest broadcast stations sequentially Storing and recalling broadcast stationsIntroduction of advanced OperationsDigital Signal Processor Introduction of DSP adjustmentsSelecting the area group Press EQ to select the desired SFC Using the sound field controlTime Align Press EQ and hold until SFC appearsUsing the position selector Using the Dolby Pro Logic Using the dynamic range controlUsing the down-mix function Using the direct controlAdjusting the Music mode Setting the speaker settingCorrecting the subwoofer’s phase Select reverse phase and Reverse appearsSelecting a cross-over frequency Adjusting the speaker output levels using a test tone Adjusting the speaker output levelsUsing the time alignment Adjusting the time alignmentAdjust POWERFUL-NATURAL-VOCAL-FLAT- CUSTOM1-CUSTOM2-SUPER Bass Adjusting 3-band parametric equalizer# To turn auto-equalizer off, touch b Using the auto-equalizerCar interior acoustic characteristics, Auto TA and EQ auto-time alignment and auto-equalizingCarrying out auto TA and EQ Before operating the auto TA and EQ functionAcoustic characteristics is not possible, an Touch ESC to cancel the auto TA and EQ# To stop auto TA and EQ, touch Stop Common Additional Information TroubleshootingProblems during DVD playback Problems during Video CD playbackAdditional Information Understanding auto TA and EQ error messages Additional Information Error messagesAdditional Additional Information Understanding messagesDVD discs Avchd recorded discsCD-R/CD-RW discs Album names and other text information Dual DiscsCompressed audio files on DiscHandling the display Using the display correctlyExample of a hierarchy Compressed audio compatibilityLiquid crystal display LCD screen Keeping the display in good conditionSmall fluorescent tube Language code, input code Additional Information Language code chart for DVDDTS Additional Information TermsMpeg VBR Audio Additional Information SpecificationsGeneral DisplayAM tuner FM tunerAudio language IndexKsnzf 07B00000 CRB2345-A RD, RI,RC Meguro 1-CHOME, MEGURO-KU Tokyo 153-8654, Japan