Pioneer AVH-P4950DVD Selecting a cross-over frequency, Correcting the subwoofer’s phase

Available accessories

3Touch aor bto select the speaker to be adjusted.

Each time you touch aor bselects the speak- er in the following order:

FRONT (front speakers)—CENTER (center speaker)—REAR (rear speakers)—

SUB WOOFER (subwoofer)—PHASE (subwoo- fer setting)

# You can switch to PHASE only when the sub- woofer has been set to ON.

4Touch cor dto select the correct size for the selected speaker.

Each time you touch cor dselects the size in the following order:

OFF (off)—SMALL (small)—LARGE (large)

# You cannot select OFF, when FRONT (front speakers) have been selected.

# You can select ON or OFF, when

SUB WOOFER (subwoofer) has been selected.

# You can switch REVERSE (reverse phase) or NORMAL (normal phase), when PHASE (subwoo- fer setting) has been selected.

Section

04

SUB WOOFER (subwoofer)—PHASE (subwoo- fer setting)

4 Touch cto turn subwoofer output on.

# To turn subwoofer output off, touch d.

5 Touch band then touch cor dto se-	Available
lect the phase of subwoofer output.
Touch dto select normal phase and
NORMAL appears in the display. Touch cto	accessories
select reverse phase and REVERSE appears in
the display.
Note

When playing a 2-channel mono source with Pro Logic turned on, there may be occasions when the following will occur:

!No audio is outputted if the center speaker setting is SMALL or LARGE and no center speaker is installed.

!Audio is heard only over the center speaker if installed and the center speaker setting is SMALL or LARGE.

Correcting the subwoofer’s phase

If trying to boost the bass output of the sub- woofer doesn’t do much or rather makes you feel that the bass gets more murky, this may indicate that the subwoofer’s output and bass content you hear over other speakers cancel each other out. To remove this problem, try changing the phase setting for the subwoofer.

1Touch NEXT on the DSP function menu.

2Touch SP SET.

3Touch aor bto select SUB WOOFER (subwoofer).

Each time you touch aor bselects the speak- er in the following order:

FRONT (front speakers)—CENTER (center speaker)—REAR (rear speakers)—

Selecting a cross-over frequency

You can select a frequency, under which sounds are reproduced through the subwoo- fer. If the installed speakers include one whose size has been set to SMALL, you can select a frequency, under which sounds are repro- duced through a LARGE speaker or subwoo- fer.

1Touch NEXT on the DSP function menu.

2Touch CROSS OVER.

3Touch aor bto select the speaker to be adjusted.

Each time you touch aor bselects the speak- er in the following order:

En 63