Pioneer AVH-P4950DVD Changing the picture adjustment, HUE hue for each source and rear view cam

Operating this unit

FULL (full)

A 4:3 picture is enlarged in the horizontal direc- tion only, giving you a 4:3 TV picture (normal pic- ture) without any omissions.

JUST (just)

The picture is enlarged slightly at the center and the amount of enlargement increases horizontally to the ends, enabling you to enjoy a 4:3 picture without sensing any disparity even on a wide screen.

CINEMA (cinema)

The picture is enlarged by the same proportion as FULL or ZOOM in the horizontal direction and by an intermediate proportion between FULL and ZOOM in the vertical direction; ideal for a cine- ma-sized picture (wide screen picture) where cap- tions lie outside.

ZOOM (zoom)

A 4:3 picture is enlarged in the same proportion both vertically and horizontally; ideal for a cine- ma-sized picture (wide screen picture).

NORMAL (normal)

A 4:3 picture is displayed as it is, giving you no sense of disparity since its proportions are the same as that of the normal picture.

Notes

!Different settings can be memorized for each video source.

!When video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different.

!Remember that using the wide mode feature of this system for commercial or public view- ing purposes may constitute an infringement on the author’s rights protected by the Copy- right Law.

!Video will appear grainy when viewed in CINEMA or ZOOM mode.

Section

03

Changing the picture adjustment

You can adjust BRIGHT (brightness),
CONTRAST (contrast), COLOR (color) and		Operating
HUE (hue) for each source and rear view cam-
era.
! The adjustments of BRIGHT and
CONTRAST are stored separately for light
ambient (daytime) and dark ambient (night-		this
time). A sun	or moon is displayed to
the left of BRIGHT and CONTRAST, respec-		unit
tively, as the ambient light sensor deter-

mines brightness or darkness.

! You cannot adjust COLOR or HUE for the audio source.

1Press V.ADJ and hold to display

PICTURE ADJUST.

Press V.ADJ until PICTURE ADJUST appears in the display.

2Touch any of the following touch panel keys to select the function to be adjusted. The adjustment function names are displayed and adjustable ones are highlighted.

!BRIGHT – Adjust the black intensity

!CONTRAST – Adjust the contrast

!COLOR – Adjust the color saturation

!HUE – Adjust the tone of color (red is em- phasized or green is emphasized)

!DIMMER – Adjust the brightness of display

!BACK-CAMERA – Switch to the picture ad- justment display for the rear view camera

#You can adjust the picture adjustment for rear view camera only when B-CAM is turned on. (Refer to Setting for rear view camera (back up camera) on page 46.)

#With some rear view cameras, picture adjust- ment may not be possible.

En 19