Pioneer AVH-P4950DVD Correcting distorted sound, Switching the sound muting/ attenuation

Section

03 Operating this unit

Notes

!Even if you change this setting, there is no output unless you turn the nonfading output (refer to Using nonfading output on page 36) or subwoofer output (refer to Using subwoofer output on page 35) in the audio menu on.

!If you change the subwoofer controller, sub- woofer output and nonfading output in the audio menu return to the factory settings.

Correcting distorted sound

You can minimize distortion that may be caused by the equalizer curve settings. Setting an equalizer level high can cause dis- tortion. If high sound is crippled or distorted, try switching to LOW. Normally, leave the set- ting at HIGH to ensure quality sound.

!Only when the multi-channel processor (e.g., DEQ-P7650) is connected to this unit, you can operate this function.

1Touch NEXT on the initial menu.

2Touch D. ATT to switch the digital at- tenuator setting.

Touching D. ATT switches the digital attenua- tor settings in the following order:

HIGH—LOW

Switching the sound muting/ attenuation

Sound from this system is muted or attenu- ated automatically when the signal from the equipment with mute function is received.

1Touch NEXT on the initial menu.

2Touch TEL/GUIDE to select any of the muting, attenuation or off.

Touch TEL/GUIDE until the desired setting ap- pears in the display.

!MUTE – Muting

!ATT 20 – Attenuation (ATT 20 has a stron- ger effect than ATT 10)

!ATT 10 – Attenuation

!OFF – Turn the sound muting/attenuation off

Notes

!The sound is muted or attenuated, MUTE or ATT are displayed and no audio adjustment is possible.

!Operation returns to normal when the phone connection or the voice guidance is ended.

Resetting the audio functions

You can reset all audio functions except vo- lume.

!Only when the multi-channel processor (e.g., DEQ-P7650) is connected to this unit, you can operate this function.

1Touch NEXT on the initial menu.

2Touch RESET.

3Touch RESET.

4Touch RESET again to reset audio func- tions.

# To cancel resetting the audio functions, touch

CANCEL.

Setting the TV signal

When this unit is connected to a TV tuner, you need to adjust the TV signal suitable to your country TV signal setting.

!This function is initially set to AUTO so that this unit automatically adjusts the TV signal setting.

1 Touch NEXT on the initial menu.

44 En