Setting for rear view camera back up camera

Section

03 Operating this unit

!Select EXT-V to watch video of a connected video unit as EXT source.

%Touch AV IN on the setup menu to se- lect the AV input setting.

Touch AV IN until the desired setting is se- lected.

!OFF – No video component connected

!VIDEO – External video component (such as portable video player)

!M-DVD – Multi-DVD player connected with RCA cable

!EXT-V – External video unit (such as

Pioneer products available in the future)

#When a multi-DVD player is connected with an AV-BUS cable, do not select M-DVD otherwise no picture will be displayed even if you select S-DVD.

Setting for rear view camera (back up camera)

CAUTION

Pioneer recommends the use of a camera which outputs mirror reversed images, other- wise screen image may appear reversed.

Important

Following functions cannot be operated in your area. (Inoperable functions are indicated in grays- cale.)

—P in P

—PinP SIZE

—PinP POS

This unit features a function that automatically switches to the rear view camera video (REAR VIEW CAMERA IN jack) when a rear view camera is installed on your vehicle. When the gear shift is in REVERSE (R) position, the video automatically switches to a rear view camera video. (For more details, consult your dealer.)

!After you set up the rear view camera set- ting, move the gear shift in REVERSE (R) and confirm if a rear view camera video can be shown on the display.

!If the display should be switched to a rear view camera video by error while you are driving forward, change the rear view cam- era setting.

!To end watching a rear view camera video and return to the source display, press V.ADJ.

1Touch B-CAM on the setup menu.

2Touch cto turn rear view camera set- ting on.

# To turn rear view camera setting off, touch d.

3Touch band then touch cor dto se- lect an appropriate setting for polarity. Each time you touch cor dit switches be- tween the following polarity:

!BATTERY – When the polarity of the con- nected lead is positive while the gear shift is in REVERSE (R) position

!GND – When the polarity of the connected lead is negative while the gear shift is in REVERSE (R) position

Setting the automatic open function

To prevent the display from hitting the shift lever of an automatic vehicle when it is in P (park) position, or when you do not wish the display to open/close automatically, you can set the automatic open function in the manual mode.

Furthermore, to adjust the LCD panel slide po- sition, you can turn the set back on or off.

1 Touch FLP ST on the setup menu.

46 En