Pioneer AVH-P4950DVD operation manual Adjusting 3-band parametric equalizer

Section

04 Available accessories

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display	Equalizer curve
POWERFUL	Powerful
NATURAL	Natural
VOCAL	Vocal
FLAT	Flat
CUSTOM1	Custom 1
CUSTOM2	Custom 2
SUPER BASS	Super bass

!CUSTOM1 and CUSTOM2 are adjusted equalizer curves.

!When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve.

1Press EQ and hold to switch to equali- zer function.

Press EQ and hold until an equalizer curve name appears in the display.

# To switch to SFC function, press EQ and hold again.

2Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers:

POWERFUL—NATURAL—VOCAL—FLAT— CUSTOM1—CUSTOM2—SUPER BASS

Adjusting 3-band parametric equalizer

For CUSTOM1 and CUSTOM2 equalizer curves, you can adjust the front, rear and cen- ter equalizer curves separately by selecting a center frequency, an equalizer level and a Q factor for each band.

!A separate CUSTOM1 curve can be cre- ated for each source.

!A CUSTOM2 curve can be created com- mon to all sources.

!The center speaker largely determines the sound image and getting the balance right isn’t easy. We recommend reproducing a 2- ch. audio (a CD for example) and getting the balance right among the speakers ex- cept for the center, and then reproducing a 5.1-ch. audio (Dolby Digital or DTS) and ad- justing the center speaker output to the balance you have already got among the other speakers.

1Touch NEXT twice on the DSP function menu.

2Touch PARA EQ.

3Touch aor bto select the desired item. Each time you touch aor bselects the item in the following order:

SP-SEL (speakers)—BAND (bands)— FREQUENCY (center frequency)—LEVEL (equalizer level)—Q. FACTOR (Q factor)

4Touch cor dto select the speaker to be adjusted.

Touch cor duntil the desired speaker ap- pears in the display.

REAR (rear speakers)—CENTER (center speak- er)—FRONT (front speakers)

# You cannot select speakers whose size is set at OFF.

5Touch band then touch cor dto se- lect the equalizer band to be adjusted. Each time you touch cor dselects equalizer bands in the following order:

66 En