Pioneer AVH-P4950DVD operation manual Digital Signal Processor, Selecting the area group

Section

04 Available accessories

Note

Storing broadcast stations with BSSM may re- place broadcast stations you have saved using P01 to P12.

Selecting the area group

1Touch COUNTRY on the function menu.

2Touch cor dto select the area group. Touch cor duntil the desired area group ap- pears in the display.

COUNTRY 1 (CCIR channel)—COUNTRY 2 (IN channel)—COUNTRY 3 (CHN channel)— COUNTRY 4 (U.K. channel)—COUNTRY 5

(OIRT channel)—COUNTRY 6 (AUSTRALIA channel)—COUNTRY 7 (SAF channel)

Digital Signal Processor

Introduction of DSP adjustments

1

You can use this unit to control multi-channel processor (e.g. DEQ-P7650), which is sold sepa- rately.

!Some functions may differ depending on the

multi-channel processor connected to this unit.

By carrying out the following settings/adjust- ments in the order shown, you can create a fi- nely-tuned sound field effortlessly.

1Setting the speaker setting

2Using the position selector

3Auto TA and EQ (auto-time alignment and auto- equalizing)

4Adjusting the time alignment

5Adjusting the speaker output levels using a test tone

6Selecting a cross-over frequency

7Adjusting the speaker output levels

8Adjusting 3-band parametric equalizer

1DSP display

Shows the DSP function names.

1Press A.MENU button to display MENU. MENU appears on the display.

2Touch DSP to display the DSP function names.

The DSP function names are displayed and operable ones are highlighted.

58 En