Pioneer PRS-D1000M owner manual Four Amplifier Ex. Bridge, Must be in Master position, 16 Ω

Page 12

Connecting the Unit

Four Amplifier (Ex. Bridge)

MODE SELECT switch

 

 

 

Connect to a car stereo.

 

 

 

For details, see the

must be in MASTER position.

SYNC OUTPUT

“Connection Diagram”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Ω to

16 Ω

Connecting wire with RCA pin plugs (sold separately).

Connecting speaker wire (sold separately).

MODE SELECT switch must

SYNC OUTPUT

be in SYNC INV position.

SYNC INPUT

Connecting wire with RCA

pin plugs (sold separately).

 

MODE SELECT switch must be

 

in SYNC INV position.

 

SYNC OUTPUT

SYNC INPUT

Connecting speaker wire (sold separately).

MODE SELECT switch must be in SYNC INV position.

Connecting wire with RCA pin plugs (sold separately).

SYNC INPUT

•Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple speakers with a bridge, check that the synthetic impedance is at least 2 Ω.

•The setting of the POWER MODE switch varies according to the speaker impedance. Slide the POWER MODE switch to the HI-CURRENT position if the impedance is from 2 Ω to less than 4 Ω, or slide it to the NORMAL position if the impedance is from 4 Ω to 16 Ω. The same setting is used for four amplifiers.

•When switching to the SYNC INV mode, the seal over the MODE SELECT switch must be peeled off and you can find SYNC INV switch. Peel off the seal after checking that connections are correct.

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PRS-D1000M English Français EspañolContents Before Using This ProductProduct Registration About This ProductSetting the Unit Power IndicatorSubsonic Select Switch Bass Boost Control SwitchMode Select Switch Input SwitchPower Mode Switch Gain ControlConnecting the Unit To prevent damage and/or injuryConnection Diagram Connecting the Power Terminal Connecting the Speaker Output Terminals Using the Speaker InputConnections when using the speaker input Use pliers, etc., to crimp lugs to wires Lug Speaker wireConnecting the Speaker Wires Bridged ModeSingle Amplifier SpeakerTwo Amplifier Ex. Bridge English EspañolTwo Amplifier Mode Select switch must be Sync INV position Four Amplifier Ex. BridgeMust be in Master position 16 ΩMode Select switch Must be in Master position To 8 Ω Connecting wire with RCA Sync pin plugs sold separatelyFour Amplifier English Español DeutschInstallation To prevent malfunction and/or injuryExample of installation on the floor mat or on the chassis Replacing the terminal coverSpecifications English Español Deutsch Français Service après-vente pour un produit Pioneer Table des matièresAvant d’utiliser cet appareil Etats-UnisEnregistrement du produit Quelques mots concernant cet appareilCommande de l’accentua- tion des graves Réglage de l’appareilTémoin ’alimentation Couvre-bornesCommutateur Mode Select Commande du gainCommande de la fréquence de coupure pour LPF Commutateur Power ModeRaccordement de l’appareil Pour éviter toute anomalie ou blessureSchéma de raccordement English Français DeutschRaccordement de la borne d’alimentation Utilisation de l’entrée de haut-parleur Raccordement des bornes de sortie vers les haut-parleursEnglish Français Deutsch Français Faites glisser le sélecteur d’entrée sur la droiteDiagramme a Correct Connexion des câbles des haut-parleursAmplificateur unique EnceinteEnglish Deux amplificateursQuatre amplificateurs connexion en pont ex Connexion des câbles des haut-parleurs vendus séparémentDe prises Cinch RCA Connexion des Vendus séparémentLe commutateur Mode Select Doit être sur la position Master Quatre amplificateursLa section Schéma de raccordement À 8 Ω Doit être sur la position Sync’installez pas l’appareil Pour éviter toute anomalie de fonctionnement ou blessureRemise en place du couvre-bornes English Français Deutsch Français Italiano NederlandsCaractéristiques techniques Page Contenido Antes de usar este productoServicio posventa para productos Pioneer EE.UURegistro del producto Sobre este productoContacte a su distribuidor si no puede detectar la causa Ajuste de esta unidad Control de refuerzo de gravesCubierta de terminales Interruptor selector subsónicoInterruptor Mode Select Interruptor Power ModeControl de ganancia Control de frecuencia de corte para LPFConexión de la unidad Para evitar daños y/o lesionesDiagrama de conexión Conexión del terminal de alimentación Conexión del terminal de salida de altavoz Uso de la entrada de altavozAltavoz Cable de altavoz La toma de entrada RCA de esta unidadDiagrama a Correcto Conexión de los cables de altavocesAmplificador simple De 4 Ω Voz De 2 ΩDos amplificadores Puente externo Español EspañolDos amplificadores Cuatro amplificadores Puente externo El interruptor Mode Select Conecte a un equipo A 8 Ω El interruptor Mode SelectCuatro amplificadores Para los detallesInstalación Para evitar fallas de funcionamiento y/o lesionesRecolocación de la cubierta de terminales Cubierta de terminalesChasis De diámetroEspecificaciones English Español Français Pioneer Corporation
Related manuals
Manual 8 pages 61.28 Kb

PRS-D1000M specifications

The Pioneer PRS-D1000M is a versatile and powerful car amplifier designed to enhance the audio experience in vehicles. Known for its robust performance and innovative features, this amplifier is ideal for enthusiasts seeking to elevate their sound system.

One of the main features of the PRS-D1000M is its impressive power output. It delivers up to 1000 watts of maximum power, allowing users to drive high-performance subwoofers and achieve deep, thunderous bass. With its RMS power rating of 500 watts at 2 ohms, this amplifier ensures that even the most demanding audio setups can be accommodated, making it suitable for both daily driving and competition use.

The PRS-D1000M employs Class D technology, which is crucial for efficiency and heat management. Class D amplifiers convert a higher percentage of the power drawn from the vehicle's electrical system into usable output, resulting in less heat generation and lower energy consumption. This is particularly beneficial for car audio systems, where space and power are often at a premium.

Another notable characteristic is the built-in low-pass filter, which allows users to tailor the sound by eliminating higher frequencies that can muddy the bass response. The variable frequency adjustment lets users set the cutoff point according to their specific subwoofer and listening preferences, resulting in a more refined audio experience.

The Pioneer PRS-D1000M also features a bass boost function, which lets users increase low-frequency output for a more pronounced bass response. This is especially useful for those who love bass-heavy music genres. The amplifier's compact design makes it easy to install in various locations within the vehicle, ensuring that it doesn't compromise valuable space.

Furthermore, the amplifier is equipped with RCA inputs for seamless integration with other audio components. It includes speaker-level inputs, allowing it to connect to factory audio systems without needing to replace the head unit.

In conclusion, the Pioneer PRS-D1000M is engineered for performance, efficiency, and flexibility. With its powerful output, advanced technologies, and user-friendly features, it is an excellent choice for anyone looking to upgrade their car's audio system and enjoy a superior listening experience on the road.
Top Page Image Contents