Pioneer PRS-D1000M owner manual Connecting the Speaker Output Terminals, Using the Speaker Input

Page 9

Connecting the Speaker Output Terminals

1.Expose the end of the speaker wires using nippers or a cutter by about 10 mm (3/8 inch) and twist.

Twist

10 mm

(3/8 inch)

2.Attach lugs to speaker wire ends. Lugs not supplied.

• Use pliers, etc., to crimp lugs to wires.

Lug

Speaker wire

3.Connect the speaker wires to the speaker output terminals.

Fix the speaker wires securely with the termi- nal screws.

Terminal screw

Speaker output terminal

Speaker wire

Using the Speaker Input

Connect the car stereo speaker output wires to the amplifier using the supplied speaker input wire with RCA pin cord.

• Slide the input switch to the right.

7Connections when using the speaker input

Car Stereo

Speaker output

White: Black:

Black: Red:

Left + Left

Right Right +

 

 

Speaker input wire with RCA pin cord

To RCA input jack of this unit.

As a result of connecting the car stereo speaker output wire to the amplifier, the power of the amplifier is turned on automatically when the car stereo is turned on. It is not necessary to connect the system remote control wire in this case.

In the case the amplifier and head unit are con- nected using a speaker input wire with RCA pin cord, the amplifier power is only turned on when one amplifier is being used. If two or more ampli- fiers are synchronously connected in combina- tion, connect the head unit and all of the ampli- fiers with the system remote control wire.

Note:

Connect the system remote control wire when the power of the amplifier is not to be turned on when the car stereo is turned on.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

8

Image 9
Contents English Français Español PRS-D1000MBefore Using This Product ContentsAbout This Product Product RegistrationPower Indicator Setting the UnitSubsonic Select Switch Bass Boost Control SwitchInput Switch Mode Select SwitchPower Mode Switch Gain ControlTo prevent damage and/or injury Connecting the UnitConnection Diagram Connecting the Power Terminal Using the Speaker Input Connecting the Speaker Output TerminalsConnections when using the speaker input Use pliers, etc., to crimp lugs to wires Lug Speaker wireBridged Mode Connecting the Speaker WiresSingle Amplifier SpeakerTwo Amplifier Ex. Bridge English EspañolTwo Amplifier Four Amplifier Ex. Bridge Mode Select switch must be Sync INV positionMust be in Master position 16 ΩConnecting wire with RCA Sync pin plugs sold separately Mode Select switch Must be in Master position To 8 ΩFour Amplifier English Español DeutschTo prevent malfunction and/or injury InstallationReplacing the terminal cover Example of installation on the floor mat or on the chassisSpecifications English Español Deutsch Français Table des matières Service après-vente pour un produit PioneerAvant d’utiliser cet appareil Etats-UnisQuelques mots concernant cet appareil Enregistrement du produitRéglage de l’appareil Commande de l’accentua- tion des gravesTémoin ’alimentation Couvre-bornesCommande du gain Commutateur Mode SelectCommande de la fréquence de coupure pour LPF Commutateur Power ModePour éviter toute anomalie ou blessure Raccordement de l’appareilEnglish Français Deutsch Schéma de raccordementRaccordement de la borne d’alimentation Raccordement des bornes de sortie vers les haut-parleurs Utilisation de l’entrée de haut-parleurEnglish Français Deutsch Français Faites glisser le sélecteur d’entrée sur la droiteConnexion des câbles des haut-parleurs Diagramme a CorrectAmplificateur unique EnceinteDeux amplificateurs EnglishConnexion des câbles des haut-parleurs vendus séparément Quatre amplificateurs connexion en pont exDe prises Cinch RCA Connexion des Vendus séparémentQuatre amplificateurs Le commutateur Mode Select Doit être sur la position MasterLa section Schéma de raccordement À 8 Ω Doit être sur la position SyncPour éviter toute anomalie de fonctionnement ou blessure ’installez pas l’appareilEnglish Français Deutsch Français Italiano Nederlands Remise en place du couvre-bornesCaractéristiques techniques Page Antes de usar este producto ContenidoServicio posventa para productos Pioneer EE.UURegistro del producto Sobre este productoContacte a su distribuidor si no puede detectar la causa Control de refuerzo de graves Ajuste de esta unidadCubierta de terminales Interruptor selector subsónicoInterruptor Power Mode Interruptor Mode SelectControl de ganancia Control de frecuencia de corte para LPFPara evitar daños y/o lesiones Conexión de la unidadDiagrama de conexión Conexión del terminal de alimentación Uso de la entrada de altavoz Conexión del terminal de salida de altavozAltavoz Cable de altavoz La toma de entrada RCA de esta unidadConexión de los cables de altavoces Diagrama a CorrectoAmplificador simple De 4 Ω Voz De 2 ΩDos amplificadores Puente externo Español EspañolDos amplificadores Cuatro amplificadores Puente externo A 8 Ω El interruptor Mode Select El interruptor Mode Select Conecte a un equipoCuatro amplificadores Para los detallesPara evitar fallas de funcionamiento y/o lesiones InstalaciónCubierta de terminales Recolocación de la cubierta de terminalesChasis De diámetroEspecificaciones English Español Français Pioneer Corporation
Related manuals
Manual 8 pages 61.28 Kb

PRS-D1000M specifications

The Pioneer PRS-D1000M is a versatile and powerful car amplifier designed to enhance the audio experience in vehicles. Known for its robust performance and innovative features, this amplifier is ideal for enthusiasts seeking to elevate their sound system.

One of the main features of the PRS-D1000M is its impressive power output. It delivers up to 1000 watts of maximum power, allowing users to drive high-performance subwoofers and achieve deep, thunderous bass. With its RMS power rating of 500 watts at 2 ohms, this amplifier ensures that even the most demanding audio setups can be accommodated, making it suitable for both daily driving and competition use.

The PRS-D1000M employs Class D technology, which is crucial for efficiency and heat management. Class D amplifiers convert a higher percentage of the power drawn from the vehicle's electrical system into usable output, resulting in less heat generation and lower energy consumption. This is particularly beneficial for car audio systems, where space and power are often at a premium.

Another notable characteristic is the built-in low-pass filter, which allows users to tailor the sound by eliminating higher frequencies that can muddy the bass response. The variable frequency adjustment lets users set the cutoff point according to their specific subwoofer and listening preferences, resulting in a more refined audio experience.

The Pioneer PRS-D1000M also features a bass boost function, which lets users increase low-frequency output for a more pronounced bass response. This is especially useful for those who love bass-heavy music genres. The amplifier's compact design makes it easy to install in various locations within the vehicle, ensuring that it doesn't compromise valuable space.

Furthermore, the amplifier is equipped with RCA inputs for seamless integration with other audio components. It includes speaker-level inputs, allowing it to connect to factory audio systems without needing to replace the head unit.

In conclusion, the Pioneer PRS-D1000M is engineered for performance, efficiency, and flexibility. With its powerful output, advanced technologies, and user-friendly features, it is an excellent choice for anyone looking to upgrade their car's audio system and enjoy a superior listening experience on the road.