Installation
■To avoid function disturbances the installation angle should be less than 30°.
■ | Do not install the device in a location where it will be subjected to high | GB |
| temperatures(i.e. direct sunlight or heating vents), heavy contamination and |
|
| strong vibrations. |
|
■ | In the event that changes to the vehicle are necessary contact your vehicle |
|
| dealer/qualified radio installation facility. |
|
Installing the device into the ISO duct
Pull the installation bracket 68 and the bezel frame 67 from the device's housing.
Place the installation bracket into the ISO mounting duct.
Bend the tabs on the installation bracket with a screw driver so that the bracket is fixed firmly into the mounting duct (see diagram).
Check to make sure that the bracket is securely fixed.
Connect the ISO socket block of the device with the two ISO plugs on your vehicle.
Connect the antenna cable from the vehicle antenna to the antenna socket on the device.
Feed the microphone unit cable into the mounting duct and connect it to the microphone unit socket. Lay the cable in such a way that the microphone unit can be secured later in the vehicle interior see chapter "Using the micro- phone" on page 32.
Contingently connect the audio cinch cable of an external amplifier to the LINE OUT socket 39 on the device.
Bluetooth Car Radio KH 2376 | 17 |