Handling and operation
Remote control
GB
Inserting the battery
Remove the supplied battery from the packing.
To insert the battery and/or change the battery proceed as follows:
Pull the battery compartment out of the remote control by pressing the lateral locking device and at the same time pull the battery compartment out.
Remove the depleted battery and insert a new battery of the type CR2025 (Button cell) into the battery com- partment. Be sure to insert the battery with the correct polarity.
Slide the battery compartment back into the remote control.
Using the remote control
Point the remote control to the Infrared sensor 23 on the front panel of the device.
NOTICE
►You can use the remote control up to a distance of 8 m from the device.
Handling and operation
In this chapter you receive important information for the handling and operation of the device.
NOTICE
►Most of the functions can be operated by the buttons on the device as well as by the buttons on the remote control. In these instructions operation via the buttons on the device is described. Any reference to the pushbuttons on the remote control will be specifically highlighted.
►If no setting is made and/or no button pushed within approx. 5 seconds the device returns to its previous operating mode. Changed settings are saved.
20 | Bluetooth Car Radio KH 2376 |