Sharp MD-MS702, MD-R2 operation manual To interrupt a synchro recording, To interrupt a recording

Page 15

6 When a sound, such as a person speaking, is picked up by the microphone, recording will begin auto- matically.

●If a silence lasts for 3 seconds or more, the recording will be paused automat- ically. However, the unit will not pause for about the first 10 seconds after recording has started.

To interrupt a synchro recording:

Press the 06 button while recording.

●The Mic synchro recording mode will be canceled, and the unit will enter the recording stand-by mode.

●To resume synchro recording, press the ENTER/F.PLAY/SYNCHRO button again.

To stop recording:

Press the ■/:OFF button.

■Recording from the microphone (Mic manual recording)

●You can start recording manually (any time you like).

1 Put the unit in the recording stand-by mode. (Perform steps 1 - 4 in the “Mic synchro recording” section.)

2 Press the 06 button.

●Recording will start.

To interrupt a recording:

Press the 06 button while recording.

●The unit will enter the recording stand- by mode.

●To resume recording, press the 06 button again.

The track number will be increased by one each time you interrupt a record- ing.

To stop recording:

Press the ■/:OFF button.

Notes:

●If you want to use a microphone, be sure it is a plug-in power type microphone that can be powered by the main unit.

●Insert the plug firmly. Otherwise, the recording will not be made properly.

●Use a microphone with a 1/8" (3.5 mm) diameter stereo mini plug.

●When a recording is made using a stereo microphone (optionally available), an analog recording will be made.

●While making a mic recording, do not connect anything to the LINE IN jack on the main unit.

14

MD-MS702

Image 15

Contents MD-MS702 Contents AccessoriesIntroduction Special Notes For Your RecordsPrecautions PrecautionsVolume setting Concern for others when Listening to MiniDiscsRemote control unit Names of Controls and IndicatorsMain unit 25 26Rechargeable battery power Power SourceAC power Alkaline battery powerDigital recording Before RecordingType of recording Analog recordingTypes of discs To prevent recorded discs from being erased accidentallyPlayback-only MiniDisc Recordable MiniDisc Recording Using the Cable Included with the Unit Recording from CDs or MDs Synchro recordingTo interrupt recording Recording from a tuner or a CD Manual recording To stop recordingAfter recording To remove the MiniDiscManual recording Recording Using AN Optionally Available Digital CableThere are cases where digital recording may be impossible Start recording Synchro recordingRecording from the microphone Mic synchro recording Recording Using a MicrophoneTo interrupt a synchro recording Recording from the microphone Mic manual recordingTo interrupt a recording When the timed auto mark setting has been changed Convenient Recording FunctionAbout the timed auto mark Recording tracks as a single track Making a track number automaticallyTo start recording from Middle of an existing track Double time recording in monaural mode To check the remaining disc timeTo create your own track numbers while recording To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout the TOC About TOC recording When is the TOC recorded?Playing a Minidisc Playback does not start when a MiniDisc is insertedTo turn off the power To interrupt playbackTo stop playback To re-start the track being played Convenient Playback FunctionsCue and review To move to the beginning of the next trackTo play at double speed Mono recording only Random play or repeat playTo interrupt fast playback To check individual track names one by one To check the elapsed time and remaining time of the trackName/stamp EditingWhat the editing function can do Disc/Track nameDivide MoveTo combine two non-contiguous tracks When one or both tracks to be combined have a nameCombine Disc nameIf an incorrect letter is entered Track nameTo add characters To change track names or disc namesTo change characters To delete charactersPage Using with Other Equipment Listening through commercially available headphonesListening through a car stereo To prevent the unit from being operated by mistake Convenient Operation FeaturesChecking the remaining amount of battery charge How to read the battery indicatorTo turn off the display backlight While in the stop modeTo eliminate the confirmation SoundAbout the sound skip guard memory To cancel the auto-play functionTo cancel the auto power save function About the auto power save functionTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Batt Empty Error MessagesGeneral MaintenanceSpecifications CleaningMiniDisc Recorder Memo Limited Warranty