Sharp MD-MS702, MD-R2 operation manual Combine, Disc name, To combine two non-contiguous tracks

Page 29

■Combine

1 Start playing the last of the two tracks you want to combine, and press the 06 but- ton.

●The unit will enter the pause mode.

2 Press the EDIT/A.MARK/TIME MARK button to select “COMBINE”.

12

To combine the fifth and sixth tracks

3 Press the ENTER/F.PLAY/SYNCHRO button.

●To cancel the operation, press the ■/:OFF button.

3

(Confirming the combination)

4 Press the ENTER/F.PLAY/SYNCHRO button again.

●The two tracks will be combined, and the unit will be paused at the beginning of the combined track.

●The numbers assigned to the tracks fol- lowing the combined track will be decreased by one automatically.

To combine two non-contiguous tracks:

First, put the two tracks next to each other in the order you want using the MOVE function (page 27). Then combine them using the COMBINE function.

When one or both tracks to be combined have a name:

The first track name will be used. However, when the first track does not have a name, the second track name will be used.

In the following cases, tracks cannot be combined.

●Tracks recorded in the monaural long-play mode and tracks recorded in the stereo mode.

●Tracks recorded from digital inputs and tracks recorded from analog inputs.

●Tracks whose recording time is less than 12 seconds.

■Disc name

●Discs can be named using a maximum of 100 characters.

●Up to 1,700 characters (approximately) can be used in the disc and track names on a single MiniDisc.

1 While in the stop mode, press the EDIT/A.MARK/TIME MARK button to select “DISC NAME”.

2 Press the ENTER/F.PLAY/SYNCHRO button.

●The unit will enter the character input mode.

●To cancel the operation, press the ■/:OFF button.

12

Cursor

3 Press the CHARACTER button repeatedly to select the type of charac- ters.

●The first 3 characters in the group of the selected characters will be dis-

played for about 1 second. !"# (Symbols)

ABC (Capital letters)

4 Press the + or - button repeatedly to select the first letter in the name.

●When the button is pressed con- tinuously, the displayed character will

change rapidly.
3	4
	4

Continued on the following page.

28

MD-MS702

Image 29

Contents MD-MS702 Introduction ContentsAccessories Special Notes For Your RecordsVolume setting PrecautionsConcern for others when Listening to MiniDiscs PrecautionsRemote control unit Names of Controls and IndicatorsMain unit 25 26Rechargeable battery power Power SourceAC power Alkaline battery powerType of recording Before RecordingAnalog recording Digital recordingPlayback-only MiniDisc Recordable MiniDisc Types of discsTo prevent recorded discs from being erased accidentally To interrupt recording Recording Using the Cable Included with the UnitRecording from CDs or MDs Synchro recording After recording To stop recordingTo remove the MiniDisc Recording from a tuner or a CD Manual recordingThere are cases where digital recording may be impossible Recording Using AN Optionally Available Digital CableStart recording Synchro recording Manual recordingRecording from the microphone Mic synchro recording Recording Using a MicrophoneTo interrupt a recording To interrupt a synchro recordingRecording from the microphone Mic manual recording About the timed auto mark When the timed auto mark setting has been changedConvenient Recording Function To start recording from Middle of an existing track Recording tracks as a single trackMaking a track number automatically To create your own track numbers while recording Double time recording in monaural modeTo check the remaining disc time To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout the TOC About TOC recording When is the TOC recorded?Playing a Minidisc Playback does not start when a MiniDisc is insertedTo stop playback To turn off the powerTo interrupt playback Cue and review Convenient Playback FunctionsTo move to the beginning of the next track To re-start the track being playedTo interrupt fast playback To play at double speed Mono recording onlyRandom play or repeat play To check individual track names one by one To check the elapsed time and remaining time of the trackWhat the editing function can do EditingDisc/Track name Name/stampDivide MoveCombine When one or both tracks to be combined have a nameDisc name To combine two non-contiguous tracksIf an incorrect letter is entered Track nameTo change characters To change track names or disc namesTo delete characters To add charactersPage Listening through a car stereo Using with Other EquipmentListening through commercially available headphones Checking the remaining amount of battery charge Convenient Operation FeaturesHow to read the battery indicator To prevent the unit from being operated by mistakeTo eliminate the confirmation While in the stop modeSound To turn off the display backlightTo cancel the auto power save function To cancel the auto-play functionAbout the auto power save function About the sound skip guard memoryTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Batt Empty Error MessagesSpecifications MaintenanceCleaning GeneralMiniDisc Recorder Memo Limited Warranty