Sharp MD-R2 Convenient Operation Features, Checking the remaining amount of battery charge

Page 34

CONVENIENT OPERATION FEATURES

■Checking the remaining amount of battery charge

The remaining amount of battery charge is

shown by the battery indicator ( ) during operation.

Battery indicator

■To prevent the unit from being operated by mistake

To prevent accidental operation, use the hold function.

Move the HOLD switch to the safety posi- tion (direction indicated by the arrow).

●When the unit is in the "hold" mode, pressing the buttons will have no effect.

< How to read the battery indicator >

When the battery is										Charging is
completely charged										needed.

When the battery needs charging, it is impossible to start recording or editing.

●When the battery is completely dis- charged, the whole battery indicator will flash. Recharge the battery or replace the alkaline batteries with new ones.

●When the battery has completely run out, “BATT EMPTY” (main unit) and “Lo BATT” (remote control unit) will appear. The power will be disconnected auto- matically.

Notes:

●When the AC adaptor included with this unit or an optionally available car adap- tor is used, the battery indicator will not be shown.

●The number of bars shown in the bat- tery indicator may increase or decrease, depending on the operation being performed. This is normal.

●When the rechargeable battery and the alkaline batteries are used at the same time, the rechargeable battery is used first, and then the alkaline batteries.

Since the battery indicator shows the remaining amount of the particular bat- tery being used, the number of bars will increase when the unit switches to the alkaline batteries.

●To cancel the hold mode, move the HOLD switch away from the safety position (the opposite direction of the arrow).

		Remote	Main
		control unit	unit
	Can be operated
	from either the	Cancel	Cancel
	remote control unit or	Cancel	Cancel
	remote control unit or
	the main unit.
	Can only be operated
	from the remote con-	Cancel	Hold
	trol unit.
	Can only be operated	Hold	Cancel
	from the main unit.	Hold	Cancel
	from the main unit.
	Cannot be operated
	from either the	Hold	Hold
	remote control unit or	Hold	Hold
	remote control unit or
	the main unit.

If the hold function is active while the power is turned off, the power cannot be turned on by mistake and the battery will not be accidentally drained.

33

MD-MS702

Image 34

Contents MD-MS702 Accessories ContentsIntroduction For Your Records Special NotesConcern for others when Listening to MiniDiscs PrecautionsVolume setting PrecautionsNames of Controls and Indicators Remote control unit25 26 Main unitPower Source Rechargeable battery powerAlkaline battery power AC powerAnalog recording Before RecordingType of recording Digital recordingTo prevent recorded discs from being erased accidentally Types of discsPlayback-only MiniDisc Recordable MiniDisc Recording from CDs or MDs Synchro recording Recording Using the Cable Included with the UnitTo interrupt recording To remove the MiniDisc To stop recordingAfter recording Recording from a tuner or a CD Manual recordingStart recording Synchro recording Recording Using AN Optionally Available Digital CableThere are cases where digital recording may be impossible Manual recordingRecording Using a Microphone Recording from the microphone Mic synchro recordingRecording from the microphone Mic manual recording To interrupt a synchro recordingTo interrupt a recording Convenient Recording Function When the timed auto mark setting has been changedAbout the timed auto mark Making a track number automatically Recording tracks as a single trackTo start recording from Middle of an existing track To check the remaining disc time Double time recording in monaural modeTo create your own track numbers while recording To erase tracks To erase tracks one at a time To erase all of the tracks at onceWhen recording from digital inputs CDs/MiniDiscs only About Track NumbersAbout TOC recording When is the TOC recorded? About the TOCPlayback does not start when a MiniDisc is inserted Playing a MinidiscTo interrupt playback To turn off the powerTo stop playback To move to the beginning of the next track Convenient Playback FunctionsCue and review To re-start the track being playedRandom play or repeat play To play at double speed Mono recording onlyTo interrupt fast playback To check the elapsed time and remaining time of the track To check individual track names one by oneDisc/Track name EditingWhat the editing function can do Name/stampMove DivideDisc name When one or both tracks to be combined have a nameCombine To combine two non-contiguous tracksTrack name If an incorrect letter is enteredTo delete characters To change track names or disc namesTo change characters To add charactersPage Listening through commercially available headphones Using with Other EquipmentListening through a car stereo How to read the battery indicator Convenient Operation FeaturesChecking the remaining amount of battery charge To prevent the unit from being operated by mistakeSound While in the stop modeTo eliminate the confirmation To turn off the display backlightAbout the auto power save function To cancel the auto-play functionTo cancel the auto power save function About the sound skip guard memoryWhat is a MINIDISC? TroubleshootingIf trouble occurs Minidisc System Limitations Error Messages Batt EmptyCleaning MaintenanceSpecifications GeneralMiniDisc Recorder Memo Limited Warranty