Sharp MD-R2, MD-MS702 Playing a Minidisc, Playback does not start when a MiniDisc is inserted

Page 22

PLAYING A MINIDISC

Headphones
For the	For the	VOL /
left (L)	right (R)	NAME
		BASS/DEL
	To the
	jack
	Remote	BASS
	control unit

1 Insert the headphones plug firmly into the headphones jack on the remote control unit.

2 Plug the remote control unit into the jack on the main unit. Push the plug

all the way in.

●Since the remote control unit plug has only one correct orientation, plug it in as shown in the drawing.

3 Load a MiniDisc in the direction indi- cated by the arrow on the MiniDisc, with the label side facing up. (Insert the MiniDisc firmly, until a click is heard.)

●The power will be turned on automat- ically, and playback will start from the first track. (Auto-play function)

Track number

●When the recordable MiniDisc write protection tab is closed (page 9)

●When the auto-play function has been canceled (page 35)

4 Press the + button to increase the volume and the - button to decrease the volume.

Volume (0 - 30)

5 Adjust the bass level.

Each time the BASS/DEL button is pressed, the tone will be switched as follows:

Track name

(Nothing will be displayed for MiniDiscs that do not contain track names.)

●After playback of the last track has finished, the unit will stop automatically.

Playback does not start when a MiniDisc is inserted:

Press the 06 button.

In the following cases, the auto-play func- tion will not work.

BASS 1 Bass sounds are emphasized slightly.

BASS 2 Bass sounds are emphasized more.

BASS 3 Bass sounds are emphasized even more. BASS OFF Bass emphasis is canceled.

●When recording, it is impossible to ad- just the bass level (Bass emphasis is canceled).

●The most recent volume or bass set- tings are saved when the power is turned off.

21

MD-MS702

Image 22

Contents MD-MS702 Accessories ContentsIntroduction For Your Records Special NotesConcern for others when Listening to MiniDiscs PrecautionsVolume setting PrecautionsNames of Controls and Indicators Remote control unit25 26 Main unitPower Source Rechargeable battery powerAlkaline battery power AC powerAnalog recording Before RecordingType of recording Digital recordingTo prevent recorded discs from being erased accidentally Types of discsPlayback-only MiniDisc Recordable MiniDisc Recording from CDs or MDs Synchro recording Recording Using the Cable Included with the UnitTo interrupt recording To remove the MiniDisc To stop recordingAfter recording Recording from a tuner or a CD Manual recordingStart recording Synchro recording Recording Using AN Optionally Available Digital CableThere are cases where digital recording may be impossible Manual recordingRecording Using a Microphone Recording from the microphone Mic synchro recordingRecording from the microphone Mic manual recording To interrupt a synchro recordingTo interrupt a recording Convenient Recording Function When the timed auto mark setting has been changedAbout the timed auto mark Making a track number automatically Recording tracks as a single trackTo start recording from Middle of an existing track To check the remaining disc time Double time recording in monaural modeTo create your own track numbers while recording To erase tracks To erase tracks one at a time To erase all of the tracks at onceWhen recording from digital inputs CDs/MiniDiscs only About Track NumbersAbout TOC recording When is the TOC recorded? About the TOCPlayback does not start when a MiniDisc is inserted Playing a MinidiscTo interrupt playback To turn off the powerTo stop playback To move to the beginning of the next track Convenient Playback FunctionsCue and review To re-start the track being playedRandom play or repeat play To play at double speed Mono recording onlyTo interrupt fast playback To check the elapsed time and remaining time of the track To check individual track names one by oneDisc/Track name EditingWhat the editing function can do Name/stampMove DivideDisc name When one or both tracks to be combined have a nameCombine To combine two non-contiguous tracksTrack name If an incorrect letter is enteredTo delete characters To change track names or disc namesTo change characters To add charactersPage Listening through commercially available headphones Using with Other EquipmentListening through a car stereo How to read the battery indicator Convenient Operation FeaturesChecking the remaining amount of battery charge To prevent the unit from being operated by mistakeSound While in the stop modeTo eliminate the confirmation To turn off the display backlightAbout the auto power save function To cancel the auto-play functionTo cancel the auto power save function About the sound skip guard memoryWhat is a MINIDISC? TroubleshootingIf trouble occurs Minidisc System Limitations Error Messages Batt EmptyCleaning MaintenanceSpecifications GeneralMiniDisc Recorder Memo Limited Warranty