Sharp MD-MS702, MD-R2 operation manual For Your Records, Special Notes

Page 3

SPECIAL NOTES

●It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever necessary.

Caution - use of controls or adjust- ments or performance of proce- dures other than those specified herein may result in hazardous radiation exposure.

●Contains Lithium-ion Battery. Must be Disposed of properly. Contact Local Environmental Officials for disposal in- structions.

●US and foreign patents licensed from Dolby Laboratories Licensing Corpora- tion.

FOR YOUR RECORDS

For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the bottom of the unit.

Please retain this information.

Model number

Serial number

Date of purchase

Place of purchase

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help.

WARNING

FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment.

2

MD-MS702

Image 3

Contents MD-MS702 Contents AccessoriesIntroduction Special Notes For Your RecordsPrecautions PrecautionsVolume setting Concern for others when Listening to MiniDiscsRemote control unit Names of Controls and IndicatorsMain unit 25 26Rechargeable battery power Power SourceAC power Alkaline battery powerDigital recording Before RecordingType of recording Analog recordingTypes of discs To prevent recorded discs from being erased accidentallyPlayback-only MiniDisc Recordable MiniDisc Recording Using the Cable Included with the Unit Recording from CDs or MDs Synchro recordingTo interrupt recording Recording from a tuner or a CD Manual recording To stop recordingAfter recording To remove the MiniDiscManual recording Recording Using AN Optionally Available Digital CableThere are cases where digital recording may be impossible Start recording Synchro recordingRecording from the microphone Mic synchro recording Recording Using a MicrophoneTo interrupt a synchro recording Recording from the microphone Mic manual recordingTo interrupt a recording When the timed auto mark setting has been changed Convenient Recording FunctionAbout the timed auto mark Recording tracks as a single track Making a track number automaticallyTo start recording from Middle of an existing track Double time recording in monaural mode To check the remaining disc timeTo create your own track numbers while recording To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout the TOC About TOC recording When is the TOC recorded?Playing a Minidisc Playback does not start when a MiniDisc is insertedTo turn off the power To interrupt playbackTo stop playback To re-start the track being played Convenient Playback FunctionsCue and review To move to the beginning of the next trackTo play at double speed Mono recording only Random play or repeat playTo interrupt fast playback To check individual track names one by one To check the elapsed time and remaining time of the trackName/stamp EditingWhat the editing function can do Disc/Track nameDivide MoveTo combine two non-contiguous tracks When one or both tracks to be combined have a nameCombine Disc nameIf an incorrect letter is entered Track nameTo add characters To change track names or disc namesTo change characters To delete charactersPage Using with Other Equipment Listening through commercially available headphonesListening through a car stereo To prevent the unit from being operated by mistake Convenient Operation FeaturesChecking the remaining amount of battery charge How to read the battery indicatorTo turn off the display backlight While in the stop modeTo eliminate the confirmation SoundAbout the sound skip guard memory To cancel the auto-play functionTo cancel the auto power save function About the auto power save functionTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Batt Empty Error MessagesGeneral MaintenanceSpecifications CleaningMiniDisc Recorder Memo Limited Warranty