Sharp MD-MS702, MD-R2 Recording tracks as a single track, Making a track number automatically

Page 17

DISPLAY

MODE/INS

■Recording tracks as a single track

You can record several pieces of music as a single track, disable the auto marker function.

1 Press the EDIT/A. MARK/TIME MARK button while the recording is paused.

(The display will be blanked out immediately.)

2 Press the 06 button.

●Recording will start.

Note:

●When making digital recordings using a CD player or an MD player, track num- bers will be created automatically regardless of the setting of the auto marker function.

Making a track number automatically:

Press the EDIT/A.MARK/TIME MARK but- ton while the recording is paused.

●“AUTO MARK” will be displayed.

■To start recording from the

middle of an existing track

You can erase a portion of a track that has been already recorded and make a new recording.

Warning:

●All of the tracks that follow the newly recorded track will be erased.

1 During playback, press the 06 button at the point where you want to begin re-recording.

2 Press the REC button.

●To cancel the operation, press the ■/:OFF button.

3 Press the ENTER/F.PLAY/SYNCHRO

button.

●All of the tracks and track names will be erased, following the point where the playback is paused.

23

Number of the track to be recorded next

4 Press the 06 button.

●Recording will start.

Note:

●When there is a track that you don't want to erase after the point on the disc where you want to make a new record- ing, use the move function to move the track and then make your recording after that point.

16

MD-MS702

Image 17

Contents MD-MS702 Introduction ContentsAccessories Special Notes For Your RecordsVolume setting PrecautionsConcern for others when Listening to MiniDiscs PrecautionsRemote control unit Names of Controls and IndicatorsMain unit 25 26Rechargeable battery power Power SourceAC power Alkaline battery powerType of recording Before RecordingAnalog recording Digital recordingPlayback-only MiniDisc Recordable MiniDisc Types of discsTo prevent recorded discs from being erased accidentally To interrupt recording Recording Using the Cable Included with the UnitRecording from CDs or MDs Synchro recording After recording To stop recordingTo remove the MiniDisc Recording from a tuner or a CD Manual recordingThere are cases where digital recording may be impossible Recording Using AN Optionally Available Digital CableStart recording Synchro recording Manual recordingRecording from the microphone Mic synchro recording Recording Using a MicrophoneTo interrupt a recording To interrupt a synchro recordingRecording from the microphone Mic manual recording About the timed auto mark When the timed auto mark setting has been changedConvenient Recording Function To start recording from Middle of an existing track Recording tracks as a single trackMaking a track number automatically To create your own track numbers while recording Double time recording in monaural modeTo check the remaining disc time To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout the TOC About TOC recording When is the TOC recorded?Playing a Minidisc Playback does not start when a MiniDisc is insertedTo stop playback To turn off the powerTo interrupt playback Cue and review Convenient Playback FunctionsTo move to the beginning of the next track To re-start the track being playedTo interrupt fast playback To play at double speed Mono recording onlyRandom play or repeat play To check individual track names one by one To check the elapsed time and remaining time of the trackWhat the editing function can do EditingDisc/Track name Name/stampDivide MoveCombine When one or both tracks to be combined have a nameDisc name To combine two non-contiguous tracksIf an incorrect letter is entered Track nameTo change characters To change track names or disc namesTo delete characters To add charactersPage Listening through a car stereo Using with Other EquipmentListening through commercially available headphones Checking the remaining amount of battery charge Convenient Operation FeaturesHow to read the battery indicator To prevent the unit from being operated by mistakeTo eliminate the confirmation While in the stop modeSound To turn off the display backlightTo cancel the auto power save function To cancel the auto-play functionAbout the auto power save function About the sound skip guard memoryTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Batt Empty Error MessagesSpecifications MaintenanceCleaning GeneralMiniDisc Recorder Memo Limited Warranty