Sharp MD-MS702, MD-R2 Before Recording, Type of recording, Analog recording, Digital recording

Page 9

BEFORE RECORDING

■Type of recording

Two types of recording are possible: “Digital recording” and “Analog recording”. There are different cables and connections for each type of recording, depending on the jacks

on the equipment being connected to the unit.

(1) Analog recording

Connect the unit to equipment that has a line output jack, using the cable included with this unit.

●Main equipment: CD player, MD player, radio cassette player, etc.

●Cable required: Connecting cable in- cluded with this unit

AUDIO OUT

Playback side

R L

(2) Digital recording

Connect the unit to equipment that has an optical output jack using an optical digital cable (available optionally). Using an opti- cal signal to transfer the music to a Mini- Disc allows very high quality recording.

●Main equipment: DSS tuner, CD player, MD player, etc.

●Cable required: Optical digital cable (AD-M1DC or AD-M2DC, available op- tionally)

Recording side

RIGHT LEFT

Connecting cable included with this unit

To the line output jacks on a stereo

Recording side

OPTICAL/

LINE IN

To the OPTICAL/LINE IN jack

	To the	OPTICAL/
	To the	LINE IN
		LINE IN
	OPTICAL/
	LINE IN	Digital cable
	jack	Digital cable
	jack	(AD-M2DC, available
		(AD-M2DC, available
		optionally)

Digital cable (AD-M1DC, available optionally)

DIGITAL OUT

OPTICAL OUT

	Playback side			Playback side
To the optical output jack			To the optical output jack
(square shaped jack) on a			(round shaped jack) on
stereo etc.			an MD player etc.

8

MD-MS702

Image 9

Contents MD-MS702 Contents AccessoriesIntroduction Special Notes For Your RecordsVolume setting PrecautionsConcern for others when Listening to MiniDiscs PrecautionsRemote control unit Names of Controls and IndicatorsMain unit 25 26Rechargeable battery power Power SourceAC power Alkaline battery powerType of recording Before RecordingAnalog recording Digital recordingTypes of discs To prevent recorded discs from being erased accidentallyPlayback-only MiniDisc Recordable MiniDisc Recording Using the Cable Included with the Unit Recording from CDs or MDs Synchro recordingTo interrupt recording After recording To stop recordingTo remove the MiniDisc Recording from a tuner or a CD Manual recordingThere are cases where digital recording may be impossible Recording Using AN Optionally Available Digital CableStart recording Synchro recording Manual recordingRecording from the microphone Mic synchro recording Recording Using a MicrophoneTo interrupt a synchro recording Recording from the microphone Mic manual recordingTo interrupt a recording When the timed auto mark setting has been changed Convenient Recording FunctionAbout the timed auto mark Recording tracks as a single track Making a track number automaticallyTo start recording from Middle of an existing track Double time recording in monaural mode To check the remaining disc timeTo create your own track numbers while recording To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout the TOC About TOC recording When is the TOC recorded?Playing a Minidisc Playback does not start when a MiniDisc is insertedTo turn off the power To interrupt playbackTo stop playback Cue and review Convenient Playback FunctionsTo move to the beginning of the next track To re-start the track being playedTo play at double speed Mono recording only Random play or repeat playTo interrupt fast playback To check individual track names one by one To check the elapsed time and remaining time of the trackWhat the editing function can do EditingDisc/Track name Name/stampDivide MoveCombine When one or both tracks to be combined have a nameDisc name To combine two non-contiguous tracksIf an incorrect letter is entered Track nameTo change characters To change track names or disc namesTo delete characters To add charactersPage Using with Other Equipment Listening through commercially available headphonesListening through a car stereo Checking the remaining amount of battery charge Convenient Operation FeaturesHow to read the battery indicator To prevent the unit from being operated by mistakeTo eliminate the confirmation While in the stop modeSound To turn off the display backlightTo cancel the auto power save function To cancel the auto-play functionAbout the auto power save function About the sound skip guard memoryTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Batt Empty Error MessagesSpecifications MaintenanceCleaning GeneralMiniDisc Recorder Memo Limited Warranty