Sharp MD-MS702, MD-R2 Editing, What the editing function can do, Disc/Track name, Name/stamp

Page 27

EDITING

■What the editing function can do

You can create original discs using the MD editing function, on which you can change the order of the tracks and you can create disc or track names.

●Playback-only MiniDiscs cannot be edited.

Move (Page 27)

A designated track can be moved to any desired position.

●The numbers assigned to the tracks following the track which is moved will be adjusted auto- matically.

Divide (Page 27)

A single track can be divided into two at any desired position.

●The numbers of the tracks which come after the newly divided track will be automatically in- creased by one.

Combine (Page 28)

Two consecutive tracks can be combined into one track.

●The numbers assigned to the tracks following the combined tracks will be decreased by one automatically.

1 2

A B

1 2

C A

1	2
A	B

1	2
A	B

1 2

AB

12

AB

3 4

C D

3 4

B D

3

C D

3 4

C D

3 4

C C

3

C

Disc/Track name (Page 28)

Discs and tracks (up to 255 tracks per disc) can be named.

Since track names are displayed when the beginning of each track is located or during playback, you can quickly check the name of each track.

●Letters (capital letters/lowercase letters), numbers and symbols can be used.

Name/stamp (Page 30)

●All of the characters and data on a recorded MD (master MD with tracks and character information) can be transferred onto a recordable MD.

26

MD-MS702

Image 27

Contents MD-MS702 Contents AccessoriesIntroduction Special Notes For Your RecordsPrecautions PrecautionsVolume setting Concern for others when Listening to MiniDiscsRemote control unit Names of Controls and IndicatorsMain unit 25 26Rechargeable battery power Power SourceAC power Alkaline battery powerDigital recording Before RecordingType of recording Analog recordingTypes of discs To prevent recorded discs from being erased accidentallyPlayback-only MiniDisc Recordable MiniDisc Recording Using the Cable Included with the Unit Recording from CDs or MDs Synchro recordingTo interrupt recording Recording from a tuner or a CD Manual recording To stop recordingAfter recording To remove the MiniDiscManual recording Recording Using AN Optionally Available Digital CableThere are cases where digital recording may be impossible Start recording Synchro recordingRecording from the microphone Mic synchro recording Recording Using a MicrophoneTo interrupt a synchro recording Recording from the microphone Mic manual recordingTo interrupt a recording When the timed auto mark setting has been changed Convenient Recording FunctionAbout the timed auto mark Recording tracks as a single track Making a track number automaticallyTo start recording from Middle of an existing track Double time recording in monaural mode To check the remaining disc timeTo create your own track numbers while recording To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout the TOC About TOC recording When is the TOC recorded?Playing a Minidisc Playback does not start when a MiniDisc is insertedTo turn off the power To interrupt playbackTo stop playback To re-start the track being played Convenient Playback FunctionsCue and review To move to the beginning of the next trackTo play at double speed Mono recording only Random play or repeat playTo interrupt fast playback To check individual track names one by one To check the elapsed time and remaining time of the trackName/stamp EditingWhat the editing function can do Disc/Track nameDivide MoveTo combine two non-contiguous tracks When one or both tracks to be combined have a nameCombine Disc nameIf an incorrect letter is entered Track nameTo add characters To change track names or disc namesTo change characters To delete charactersPage Using with Other Equipment Listening through commercially available headphonesListening through a car stereo To prevent the unit from being operated by mistake Convenient Operation FeaturesChecking the remaining amount of battery charge How to read the battery indicatorTo turn off the display backlight While in the stop modeTo eliminate the confirmation SoundAbout the sound skip guard memory To cancel the auto-play functionTo cancel the auto power save function About the auto power save functionTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Batt Empty Error MessagesGeneral MaintenanceSpecifications CleaningMiniDisc Recorder Memo Limited Warranty