Sharp MD-R2, MD-MS702 operation manual Error Messages, Batt Empty

Page 40

ERROR MESSAGES

Error messages

Meaning

Remedy

BATT EMPTY

The battery has run down.

Charge the rechargeable battery or

 

replace the alkaline batteries (or use

 

 

the AC adaptor for power).

BLANK DISC

Nothing is recorded.

Replace the disc with a recorded

 

disc.

 

 

Can't COPY

No copy can be made because of

Record using the analog cable.

the SCMS copyright system.

 

 

 

Can't EDIT

A track cannot be edited.

Change the stop position of the

 

track and then try editing it.

 

 

Can't REC

Recording cannot be performed

Re-record or replace it with another

correctly due to vibration or shock

recordable disc.

 

in the unit.

 

Can't WRITE

Editing is impossible.

Check the number of tracks.

 

The disc is scratched.

If the sound you hear is not correct,

DEFECT

 

try recording again.

 

Replace the disc with another

 

 

 

 

recordable disc.

Din UNLOCK

Poor connection of the digital cable.

Connect the digital cable securely.

DISC ERROR

The disc is damaged.

Reload the disc or replace it.

DISC FULL

The disc is out of recording space.

Replace it with another recordable

 

disc.

 

 

HOLD

The unit is in the safety mode.

Return the HOLD switch to its

 

original position.

 

 

LOCKED

The EJECT lever was moved

Turn off the power and remove the

LOCK ERROR

during recording or editing.

MiniDisc.

NO DISC

A disc has not been loaded.

Load a disc.

PB DISC

The disc is write protected.

Move the write protection knob

You tried to record on a playback-

back to its original position.

PROTECTED

only disc.

Replace it with a recordable disc.

 

POWER ?

Improper power is being supplied.

Use one of the specified power

 

sources.

 

 

SORRY

Since a track number is currently

Wait and then try the operation

being located or written to, the unit

again.

 

cannot accept your command.

 

SYSTEM ERR

The unit is malfunctioning and will

For service, contact your local

 

require service.

Sharp authorized service center.

TEMP OVER

The temperature is too high.

Turn off the power, and wait for the

 

unit to cool.

 

 

TOC ERROR

A large portion of the disc has been

Replace it with another recorded

damaged.

disc.

 

TOC FULL

There is no space left for recording

Replace it with another recordable

character information (track names,

disc.

 

disc names, etc.).

 

Tr. Protect

The track has been protected from

Edit the track with the device on

being erased.

which it was recorded.

 

 

A large portion of the disc has been

Replace it with another recorded

U TOC ERROR

damaged.

disc.

There is an error in the recorded

Erase all of the signal errors, and

 

signal.

then try recording again.

 

A disc which contains data other

A disc which contains non-music

? DISC

than music was played.

data cannot be played.

There is an error in the signal from

Replace it with another recorded

 

 

the disc.

disc.

39

MD-MS702

Image 40
Contents MD-MS702 Accessories ContentsIntroduction For Your Records Special NotesPrecautions Volume settingConcern for others when Listening to MiniDiscs PrecautionsNames of Controls and Indicators Remote control unit25 26 Main unitPower Source Rechargeable battery powerAlkaline battery power AC powerBefore Recording Type of recordingAnalog recording Digital recordingTo prevent recorded discs from being erased accidentally Types of discsPlayback-only MiniDisc Recordable MiniDisc Recording from CDs or MDs Synchro recording Recording Using the Cable Included with the UnitTo interrupt recording To stop recording After recordingTo remove the MiniDisc Recording from a tuner or a CD Manual recordingRecording Using AN Optionally Available Digital Cable There are cases where digital recording may be impossibleStart recording Synchro recording Manual recordingRecording Using a Microphone Recording from the microphone Mic synchro recordingRecording from the microphone Mic manual recording To interrupt a synchro recordingTo interrupt a recording Convenient Recording Function When the timed auto mark setting has been changedAbout the timed auto mark Making a track number automatically Recording tracks as a single trackTo start recording from Middle of an existing track To check the remaining disc time Double time recording in monaural modeTo create your own track numbers while recording To erase tracks To erase tracks one at a time To erase all of the tracks at onceWhen recording from digital inputs CDs/MiniDiscs only About Track NumbersAbout TOC recording When is the TOC recorded? About the TOCPlayback does not start when a MiniDisc is inserted Playing a MinidiscTo interrupt playback To turn off the powerTo stop playback Convenient Playback Functions Cue and reviewTo move to the beginning of the next track To re-start the track being playedRandom play or repeat play To play at double speed Mono recording onlyTo interrupt fast playback To check the elapsed time and remaining time of the track To check individual track names one by oneEditing What the editing function can doDisc/Track name Name/stampMove DivideWhen one or both tracks to be combined have a name CombineDisc name To combine two non-contiguous tracksTrack name If an incorrect letter is enteredTo change track names or disc names To change charactersTo delete characters To add charactersPage Listening through commercially available headphones Using with Other EquipmentListening through a car stereo Convenient Operation Features Checking the remaining amount of battery chargeHow to read the battery indicator To prevent the unit from being operated by mistakeWhile in the stop mode To eliminate the confirmationSound To turn off the display backlightTo cancel the auto-play function To cancel the auto power save functionAbout the auto power save function About the sound skip guard memoryWhat is a MINIDISC? TroubleshootingIf trouble occurs Minidisc System Limitations Error Messages Batt EmptyMaintenance SpecificationsCleaning GeneralMiniDisc Recorder Memo Limited Warranty