Sharp MD-R2, MD-MS702 operation manual

Page 32

●Check whether the total number of tracks on the newly recorded MiniDisc matches the total number of tracks on the master MiniDisc. If they do not match each other, combine or divide tracks using the edit operation. (Pages 27–28)

●This function can not be performed from pre-recorded (playback only) Mini- Discs.

2 When the recording is complete, remove the newly recorded MiniDisc and load the master MiniDisc into the MD-MS702.

●Do not mistake the master MiniDisc for the newly recorded MiniDisc.

3 While in the stop mode, press the EDIT/A.MARK/TIME MARK button to select “NAME STAMP”.

4 Press the ENTER/F.PLAY/SYNCHRO

button.

●To cancel the operation, press the

■/:OFF button.

7 Load the newly recorded MiniDisc into the MD-MS702.

●To cancel the operation, press the ■/:OFF button.

8 Press the ENTER/F.PLAY/SYNCHRO

button.

●The unit will finish recording the char- acter information and enter the stop mode.

34

5 Press the ENTER/F.PLAY/SYNCHRO

button.

●The character information of the master MiniDisc is being read.

6 When the unit displays “CHANGE MD”, remove the master MiniDisc.

●Remove the master MiniDisc without turning off the power. If you do, the operation will be canceled.

Note:

●If the total number of tracks on the master MiniDisc does not match the total number of tracks on the newly recorded MiniDisc, the unit will display “Can't WRITE” and the power will be turned off.

If this happens, adjust the total number of tracks on the newly recorded Mini- Disc using the edit operation, and then try again from step 2.

56

31

MD-MS702

Image 32

Contents MD-MS702 Introduction ContentsAccessories For Your Records Special NotesPrecautions Volume settingConcern for others when Listening to MiniDiscs PrecautionsNames of Controls and Indicators Remote control unit25 26 Main unitPower Source Rechargeable battery powerAlkaline battery power AC powerBefore Recording Type of recordingAnalog recording Digital recordingPlayback-only MiniDisc Recordable MiniDisc Types of discsTo prevent recorded discs from being erased accidentally To interrupt recording Recording Using the Cable Included with the UnitRecording from CDs or MDs Synchro recording To stop recording After recordingTo remove the MiniDisc Recording from a tuner or a CD Manual recordingRecording Using AN Optionally Available Digital Cable There are cases where digital recording may be impossibleStart recording Synchro recording Manual recordingRecording Using a Microphone Recording from the microphone Mic synchro recordingTo interrupt a recording To interrupt a synchro recordingRecording from the microphone Mic manual recording About the timed auto mark When the timed auto mark setting has been changedConvenient Recording Function To start recording from Middle of an existing track Recording tracks as a single trackMaking a track number automatically To create your own track numbers while recording Double time recording in monaural modeTo check the remaining disc time To erase tracks To erase tracks one at a time To erase all of the tracks at onceWhen recording from digital inputs CDs/MiniDiscs only About Track NumbersAbout TOC recording When is the TOC recorded? About the TOCPlayback does not start when a MiniDisc is inserted Playing a MinidiscTo stop playback To turn off the powerTo interrupt playback Convenient Playback Functions Cue and reviewTo move to the beginning of the next track To re-start the track being playedTo interrupt fast playback To play at double speed Mono recording onlyRandom play or repeat play To check the elapsed time and remaining time of the track To check individual track names one by oneEditing What the editing function can doDisc/Track name Name/stampMove DivideWhen one or both tracks to be combined have a name CombineDisc name To combine two non-contiguous tracksTrack name If an incorrect letter is enteredTo change track names or disc names To change charactersTo delete characters To add charactersPage Listening through a car stereo Using with Other EquipmentListening through commercially available headphones Convenient Operation Features Checking the remaining amount of battery chargeHow to read the battery indicator To prevent the unit from being operated by mistakeWhile in the stop mode To eliminate the confirmationSound To turn off the display backlightTo cancel the auto-play function To cancel the auto power save functionAbout the auto power save function About the sound skip guard memoryWhat is a MINIDISC? TroubleshootingIf trouble occurs Minidisc System Limitations Error Messages Batt EmptyMaintenance SpecificationsCleaning GeneralMiniDisc Recorder Memo Limited Warranty