Sharp MD-R2, MD-MS702 operation manual If trouble occurs

Page 38

Many potential “problems” can be resolved by the owner without calling a service tech- nician. If something seems to be wrong with this product, check the following before calling your authorized SHARP dealer or service center.

PROBLEM

CAUSE

 

 

 

● Is the AC adaptor disconnected?

The unit does not turn

● Is the battery exhausted?

● Is the unit in the safety mode?

on.

● Has condensation formed inside the unit?

 

● Is the unit being influenced by mechanical shock or by

 

static electricity?

 

 

 

● Is the volume set too low?

No sound is heard

● Is the remote control unit or the headphones plugged

in?

from the headphones.

● Are you trying to play a MiniDisc with data on it

 

 

instead of a MiniDisc containing music?

 

 

When the operation

● Is the unit in the safety mode?

buttons are pressed,

● Is the battery exhausted?

the unit does not

● Is the remote control unit plug or the headphone plug

respond.

inserted firmly?

 

 

Some sounds are

● Is the battery exhausted?

skipped.

● Is the unit being subjected to excessive vibration?

 

 

The MiniDisc cannot

● Has the track number or character information been

written on the disc yet?

be ejected.

● Is the unit in the recording or editing mode?

 

 

 

 

● Is the MiniDisc protected against accidental erasure?

Recording and editing

● Is the unit connected properly to the other equipment?

● Is the AC adaptor unplugged or did a power failure

are impossible.

occur while recording or editing?

 

 

● Is the unit in the safety mode?

 

 

■If trouble occurs

When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following:

1.Unplug the AC adaptor from the AC outlet.

2.Remove the battery.

3.Leave the unit completely unpowered for approximately 30 seconds.

4.Plug the AC adaptor back into the AC outlet and retry the operation.

If strange sounds, smell or smoke come out of the unit or an object is dropped into the unit, remove the AC adaptor from the AC outlet immediately and contact an authorized Sharp service center.

37

MD-MS702

Page 37 Page 39
Image 38
Page 37 Page 39
Contents MD-MS702 Introduction ContentsAccessories For Your Records Special NotesConcern for others when Listening to MiniDiscs PrecautionsVolume setting PrecautionsNames of Controls and Indicators Remote control unit25 26 Main unitPower Source Rechargeable battery powerAlkaline battery power AC powerAnalog recording Before RecordingType of recording Digital recordingPlayback-only MiniDisc Recordable MiniDisc Types of discsTo prevent recorded discs from being erased accidentally To interrupt recording Recording Using the Cable Included with the UnitRecording from CDs or MDs Synchro recording To remove the MiniDisc To stop recordingAfter recording Recording from a tuner or a CD Manual recordingStart recording Synchro recording Recording Using AN Optionally Available Digital CableThere are cases where digital recording may be impossible Manual recordingRecording Using a Microphone Recording from the microphone Mic synchro recordingTo interrupt a recording To interrupt a synchro recordingRecording from the microphone Mic manual recording About the timed auto mark When the timed auto mark setting has been changedConvenient Recording Function To start recording from Middle of an existing track Recording tracks as a single trackMaking a track number automatically To create your own track numbers while recording Double time recording in monaural modeTo check the remaining disc time To erase tracks To erase tracks one at a time To erase all of the tracks at onceWhen recording from digital inputs CDs/MiniDiscs only About Track NumbersAbout TOC recording When is the TOC recorded? About the TOCPlayback does not start when a MiniDisc is inserted Playing a MinidiscTo stop playback To turn off the powerTo interrupt playback To move to the beginning of the next track Convenient Playback FunctionsCue and review To re-start the track being playedTo interrupt fast playback To play at double speed Mono recording onlyRandom play or repeat play To check the elapsed time and remaining time of the track To check individual track names one by oneDisc/Track name EditingWhat the editing function can do Name/stampMove DivideDisc name When one or both tracks to be combined have a nameCombine To combine two non-contiguous tracksTrack name If an incorrect letter is enteredTo delete characters To change track names or disc namesTo change characters To add charactersPage Listening through a car stereo Using with Other EquipmentListening through commercially available headphones How to read the battery indicator Convenient Operation FeaturesChecking the remaining amount of battery charge To prevent the unit from being operated by mistakeSound While in the stop modeTo eliminate the confirmation To turn off the display backlightAbout the auto power save function To cancel the auto-play functionTo cancel the auto power save function About the sound skip guard memoryWhat is a MINIDISC? TroubleshootingIf trouble occurs Minidisc System Limitations Error Messages Batt EmptyCleaning MaintenanceSpecifications GeneralMiniDisc Recorder Memo Limited Warranty
Top Page Image Contents