Sharp MD-R2 To check the remaining disc time, To create your own track numbers while recording

Page 18

■To check the remaining disc time

While recording, you can check the remaining time available on the disc.

Press the DISPLAY button while recording or while in the recording pause mode.

Remaining recordable time

●When the DISPLAY button is pressed again, the unit will return to the initial display.

Note:

●The display of the remaining disc time may vary slightly from the actual remaining time. (Page 38)

■To create your own track numbers while recording

You can create your own track numbers at special points in a recording, so that these points can easily be found later.

At any point where you want to create a track number while recording, press the REC button on the main unit or the BASS button on the remote control unit.

●The track number will be written on the disc and the recording will continue uninterrupted.

■Double time recording in monaural mode

When recording in the monaural long-play mode, recordings will be approximately twice as long as the recording time avail- able for a stereo recording. The monaural long-play mode is very useful for recording conferences or lectures.

Press the MODE/INS button while the recording is paused.

●Each time this button is pressed, the display will switch between the stereo mode and the monaural long-play mode.

Lights up while in the monaural long-play mode.

Notes:

●If input is from a stereo source, the sounds from the left and right channels will be combined.

●Although the monitor sound you hear in the headphones while recording is in stereo, recording will be monaural.

●MiniDiscs recorded in the monaural long-play mode cannot be played on other MD players.

●When a recording is made in the monaural long-play mode, you will be able to play back the MiniDisc twice as fast as the normal playback speed. (Page 24)

●When the unit is stopped after a record- ing has been made in the monaural long-play mode, the recording mode will return to the stereo mode automat- ically.

17

MD-MS702

Image 18

Contents MD-MS702 Contents AccessoriesIntroduction For Your Records Special NotesConcern for others when Listening to MiniDiscs PrecautionsVolume setting PrecautionsNames of Controls and Indicators Remote control unit25 26 Main unitPower Source Rechargeable battery powerAlkaline battery power AC powerAnalog recording Before RecordingType of recording Digital recordingTypes of discs To prevent recorded discs from being erased accidentallyPlayback-only MiniDisc Recordable MiniDisc Recording Using the Cable Included with the Unit Recording from CDs or MDs Synchro recordingTo interrupt recording To remove the MiniDisc To stop recordingAfter recording Recording from a tuner or a CD Manual recordingStart recording Synchro recording Recording Using AN Optionally Available Digital CableThere are cases where digital recording may be impossible Manual recordingRecording Using a Microphone Recording from the microphone Mic synchro recordingTo interrupt a synchro recording Recording from the microphone Mic manual recordingTo interrupt a recording When the timed auto mark setting has been changed Convenient Recording FunctionAbout the timed auto mark Recording tracks as a single track Making a track number automaticallyTo start recording from Middle of an existing track Double time recording in monaural mode To check the remaining disc timeTo create your own track numbers while recording To erase tracks To erase tracks one at a time To erase all of the tracks at onceWhen recording from digital inputs CDs/MiniDiscs only About Track NumbersAbout TOC recording When is the TOC recorded? About the TOCPlayback does not start when a MiniDisc is inserted Playing a MinidiscTo turn off the power To interrupt playbackTo stop playback To move to the beginning of the next track Convenient Playback FunctionsCue and review To re-start the track being playedTo play at double speed Mono recording only Random play or repeat playTo interrupt fast playback To check the elapsed time and remaining time of the track To check individual track names one by oneDisc/Track name EditingWhat the editing function can do Name/stampMove DivideDisc name When one or both tracks to be combined have a nameCombine To combine two non-contiguous tracksTrack name If an incorrect letter is enteredTo delete characters To change track names or disc namesTo change characters To add charactersPage Using with Other Equipment Listening through commercially available headphonesListening through a car stereo How to read the battery indicator Convenient Operation FeaturesChecking the remaining amount of battery charge To prevent the unit from being operated by mistakeSound While in the stop modeTo eliminate the confirmation To turn off the display backlightAbout the auto power save function To cancel the auto-play functionTo cancel the auto power save function About the sound skip guard memoryWhat is a MINIDISC? TroubleshootingIf trouble occurs Minidisc System Limitations Error Messages Batt EmptyCleaning MaintenanceSpecifications GeneralMiniDisc Recorder Memo Limited Warranty