Siemens S45i manual Profiles, Profile settings

WAP43

Setup

Preparation of the phone for Internet access depends on the service pro- vider currently used:

•If the settings have already been made by the service provider you may begin immediately.

•If access profiles have already been assigned by the service pro- vider, select a profile and activate it (page 43).

•The access profile must be set and activated manually (page 43).

If necessary, check with your service provider for details.

Profiles

You can set or change up to 5 access profiles (may be barred by the serv- ice provider). The entries and func- tions may vary depending on your service provider. You can change a profile each time before you access the Internet (page 44).

Profile settings

To create a new profile proceed as follows:

§Menu§fSurf & funfInternetf Profiles

V Selectchanged.the profile to be §Edit§ The entry card is dis-

played.

V Makeby field.your entries field

You may get further information on the entries from your service provider.

Profile name Name the profile or rename a

default name.

GPRS and CSD data see page 81.

WAP	IP address:
parameters	Enter IP address.
	Port:
	Enter port number.
	Homepage:
	Enter homepage if not set by
	the service provider.
	Linger time:
	Enter time in seconds after
	which a connection should
	be terminated if no input or
	data transfer takes place.

§Save§ The settings are stored and the profile list is shown.

Special characters

(as in the SMS text editor) * Press 3 x for /

# Press 3 x for @ 0 Press for . (full stop)

0 Press repeatedly for : * Press repeatedly for ~