Divert51
You can set the conditions for which calls are diverted to your mailbox or other numbers.
§Menu§fDivert
You can set divert as follows:
The most common condition for for- warding is:
Unanswered
§Menu§fDivert
B Select Unanswered.
§Select§ Press.
Set Select.
J Enter the phone number to which a call will be diverted (if not done already)
or
@ select the phone number from the Addressbook/
Phonebook or from the §Mailbox§, confirm with:
§OK§ After a short pause, the setting is confirmed by the network.
Unanswered
This setting covers the most important con- ditions (see also below):
Not reachable, No reply, Busy
All calls
All calls are diverted.
rSymbol in the top line of the display in standby mode.
Specific divert
Not reachable
Divert if the phone is switched off or out of range.
No reply
A call is only diverted after a delay (depends on the network). The peri- od can be set by the user to a maxi- mum of 30 seconds in 5 second intervals.
Busy
Divert if a call is in progress.
Exception: If Call waiting is activated (page 80), you will hear the call waiting tone (page 13) during a call.
Receiving fax
Fax calls are diverted to a number with a fax connection.
Receiving data
Data calls are diverted to a phone number with a PC connection.