Audio71
You can set the tones that sound in specific situations to suit your particular tastes.
§Menu§fAudiof
then select a function:
Ringer setting
Activate, deactivate the ringer or re- duce it to a short beep and confirm
this as the basic setting.
)
&Ringer is deactivated.
In standby mode: Activate and deactivate the ringer for the current session:
*Hold down.
Once the phone has been switched off and on again and following use with the headset or car kit, the basic setting becomes active again.
Volume
B Select the range:
All calls
dCalls VIP calls Alarm Messages
B CellSet broadcastvolume.
§OK§ Confirm.
Displays rising volume.
If two separate phone numbers are regis-
tered for your phone, you can set different volumes for them (page 77).
Silent alert
To avoid being disturbed by the ring- er, you can activate the trembler in- stead. It can also be active in addi- tion to the ringer (e.g. in noisy environments). The trembler is de- activated when the battery is being recharged.
Call screening | ~ |
Only calls from numbers that are in the Phonebook/Addressbook are signalled audibly or by the trembler. Other calls are merely displayed.
If you do not accept these calls, they are diverted to your mailbox (if set, page 51).
( Displayed when activated.
Information tones
Activate/deactivate all service tones and alarm tones or use Extended to
activate/deactivate tones.
Key tones
Set the acoustic key tone:
Click or Tone or Silent