Setup83
Accessories
§Menu§fSetupfAccessories
select a function:
Headset
If an original Siemens Headset is used the profile is activated auto- matically as soon as the headset is plugged in.
User-definable settings
Auto answer (factory default: off)
Calls are automatically accepted af- ter a few seconds. You should there- fore wear the headset.
Unwanted
Automatic settings
•Accept call with the Call key or PTT key (Push To Talk) when the key lock is activated.
•Activate voice dialling with the PTT key.
•Swap using the PTT key.
•End call using the PTT key (hold down).
Car Kit
If an original Siemens Car Kit is used the profile is activated automatically as soon as the phone is inserted into the cradle.
Modifiable settings
Auto answer (factory default: off)
Calls are automatically accepted af- ter a few seconds. Depending on the setup the ignition may need to be switched on.
%Indication on the display.
Unwanted
Switch between the phone and
Car Kit Portable
-Switch to headset during a call (if the phone is con- nected to Car Kit Portable).
Auto off (factory default: 2 hours)
The phone is powered by the car's power supply. The time between switching off the ignition and deacti- vation of the phone can be adjusted.
Automatic settings
•Permanent illumination: Switched on,
•Auto key lock: Switched off,
•Charge the phone battery,
•Automatically activate Car Kit, when the phone is inserted.
HomeStation
These functions are only available with the appropriate original Siemens accessories (page 96).